|
|
| Applications |
| Mailing Lists |
| Miscellaneous |
| Operating Systems |
| Programming |
Bug#435834: installation-report: various problems with RAID1/cryptsetup/LVM
From: Luca Capello <luca(at)pca.it>
Date: Fri Aug 03 2007 - 10:04:31 EDT
Date: Fri Aug 03 2007 - 10:04:31 EDT
Package: installation-reports
Version: 2.29
Severity: important
Hello,
here the report for an installation on a quite old machine. I experienced different errors, read below.
Thx, bye,
Gismo / Luca
- Package-specific info:
Boot method: netboot
Image version: etch-4.0r0 (current on the FTP site)
Date: 2007/07/24 around 14:00+0200
Machine:
motherboard ASUS P3B-F, BIOS 1008.004
processor Intel Pentium-II (Deschutes) 333MHz
RAM installed 768MB
Video Diamond VIPER V550 16MB AGP
HD Seagate Barracuda 7200.10 ST3240620A (IDE 250GB)
Promise SATA 300 TX4
2x HD Seagate Barracuda 7200.10 ST3250820AS (SATA 250GB)
Partitions:
luca@simba:~$ /sbin/fdisk -l /dev/sda
Disk /dev/sda: 250.0 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System /dev/sda1 * 1 24 192748+ 83 Linux /dev/sda2 25 30401 244003252+ fd Linux raid autodetectluca@simba:~$ /sbin/fdisk -l /dev/sdb
Disk /dev/sdb: 250.0 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System /dev/sdb1 * 1 24 192748+ 83 Linux /dev/sdb2 25 30401 244003252+ fd Linux raid autodetectluca@simba:~$
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O] Detect network card: [O] Configure network: [O] Detect CD: [ ] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [E] Install base system: [O] Clock/timezone setup: [O] User/password setup: [O] Install tasks: [O] Install boot loader: [O] Overall install: [E]
Comments/Problems:
- partition step
I firstly created the /boot partition on both SATA drives: despite the fact that after the installation /dev/sdb1 is mounted as /boot and /dev/sda1 as /boot.bck, I remember to have set /boot on the first available device (port1/channel1 of the Promise TX4), thus it seems that the linux kernel missmap the Promise TX4 devices [1]. Anyway,the remaining spaces was used for a RAID1 array, then encrypted and finally LVM was added. After having partitioned the LVM space, I realised I forgot the swap space. But I haven't any more the "Configure LVM" option in partman. I tried also to remove the existing LVs, but with no success. Thus I created the LVs from the command-line and they appeared in partman after having restarted it (i.e. "Go Back" -> "Partition Disks").
2) boot
At reboot, the machine didn't boot: I tried to play with the motherboard boot options, but without success. I then detached both disks and attached them to another machine to be sure the installation process has installed the necessary files. /boot (/dev/sdb1) correctly had a grub/ folder and all the linux files, while /boot.bck (/dev/sda1) was empty. I then tried to clone the boot sector, still without success (and this is why both disks have a bootable partition). As a final test, I attached one disk at a time and the machine could boot with /dev/sdb attached to port1/channel1 of the Promise TX4 and /dev/sda attached to port2/channel2.
3) initrd
The first boot stopped because vgsimba couldn't be find. So, I booted the etch-4.0r0 multiarch (i386/amd64/powerpc) rescue mode and manually set up the chroot (AFAIK there's no automatic way for an encrypted device). `update-initramfs -k all -u` complained about an error in /etc/crypttab and indeed /etc/crypptab was empty: I filled it with
md0_crypt /dev/md0 none luks
and at the next boot (after having created an updated initrd) the machine booted with no problem.
To resume, there were problems with the LVM configuration ("Configure LVM" partman option disappeared), with the encrypted / (/etc/crypttab empty) and with the boot. All the /var/log/installer/ logs are available upon request (FYI partman log is 2.6M).
As this is a backup machine, I need to have it up as soon as possible. However, I can re-install the machine to check if the errors are reproducible. I'm going to wait until Wed, 08 Aug and then if no one has asked for a re-install, I'll start doing backups on it.
BTW, X/GNOME was correctly configured without any manual setup.
Footnotes:
[1] actually, I'm sure of my words because the first time I entered
the chroot in rescue mode /etc/fstab contains the correct lines
/dev/sda1 /boot ext3 defaults 0 2
/dev/sdb1 /boot.bck ext3 defaults 0 2
lines that I needed to change later on
-- Please make sure that the hardware-summary log file, and any other installation logs that you think would be useful are attached to this report. Please compress large files using gzip. Once you have filled out this report, mail it to submit@bugs.debian.org. ============================================== Installer lsb-release: ============================================== DISTRIB_ID=Debian DISTRIB_DESCRIPTION="Debian GNU/Linux installer" DISTRIB_RELEASE="4.0 (installer build 20070308)" X_INSTALLATION_MEDIUM=netboot ============================================== Installer hardware-summary: ============================================== umame -a: Linux simba 2.6.18-4-486 #1 Wed Feb 21 15:25:16 UTC 2007 i686 unknown lspci -nn: 00:00.0 Host bridge [0600]: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge [8086:7190] (rev 03) lspci -nn: 00:01.0 PCI bridge [0604]: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge [8086:7191] (rev 03) lspci -nn: 00:04.0 ISA bridge [0601]: Intel Corporation 82371AB/EB/MB PIIX4 ISA [8086:7110] (rev 02) lspci -nn: 00:04.1 IDE interface [0101]: Intel Corporation 82371AB/EB/MB PIIX4 IDE [8086:7111] (rev 01) lspci -nn: 00:04.2 USB Controller [0c03]: Intel Corporation 82371AB/EB/MB PIIX4 USB [8086:7112] (rev 01) lspci -nn: 00:04.3 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] (rev 02) lspci -nn: 00:0a.0 Mass storage controller [0180]: Promise Technology, Inc. PDC40718 (SATA 300 TX4) [105a:3d17] (rev 02) lspci -nn: 00:0b.0 Ethernet controller [0200]: 3Com Corporation 3c905C-TX/TX-M [Tornado] [10b7:9200] (rev 74) lspci -nn: 01:00.0 VGA compatible controller [0300]: nVidia Corporation NV4 [RIVA TNT] [10de:0020] (rev 04) lspci -vnn: 00:00.0 Host bridge [0600]: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge [8086:7190] (rev 03) lspci -vnn: Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8024] lspci -vnn: Flags: bus master, medium devsel, latency 64 lspci -vnn: Memory at e4000000 (32-bit, prefetchable) [size=64M] lspci -vnn: Capabilities: [a0] AGP version 1.0 lspci -vnn: lspci -vnn: 00:01.0 PCI bridge [0604]: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge [8086:7191] (rev 03) lspci -vnn: Flags: bus master, 66MHz, medium devsel, latency 64 lspci -vnn: Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 lspci -vnn: Memory behind bridge: e1000000-e2dfffff lspci -vnn: Prefetchable memory behind bridge: e2f00000-e3ffffff lspci -vnn: lspci -vnn: 00:04.0 ISA bridge [0601]: Intel Corporation 82371AB/EB/MB PIIX4 ISA [8086:7110] (rev 02) lspci -vnn: Flags: bus master, medium devsel, latency 0 lspci -vnn: lspci -vnn: 00:04.1 IDE interface [0101]: Intel Corporation 82371AB/EB/MB PIIX4 IDE [8086:7111] (rev 01) (prog-if 80 [Master]) lspci -vnn: Flags: bus master, medium devsel, latency 32 lspci -vnn: I/O ports at d800 [size=16] lspci -vnn: lspci -vnn: 00:04.2 USB Controller [0c03]: Intel Corporation 82371AB/EB/MB PIIX4 USB [8086:7112] (rev 01) lspci -vnn: Flags: bus master, medium devsel, latency 32, IRQ 9 lspci -vnn: I/O ports at d400 [size=32] lspci -vnn: lspci -vnn: 00:04.3 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] (rev 02) lspci -vnn: Flags: medium devsel, IRQ 9 lspci -vnn: lspci -vnn: 00:0a.0 Mass storage controller [0180]: Promise Technology, Inc. PDC40718 (SATA 300 TX4) [105a:3d17] (rev 02) lspci -vnn: Subsystem: Promise Technology, Inc. PDC40718 (SATA 300 TX4) [105a:3d17] lspci -vnn: Flags: bus master, 66MHz, medium devsel, latency 72, IRQ 5 lspci -vnn: I/O ports at d000 [size=128] lspci -vnn: I/O ports at b800 [size=256] lspci -vnn: Memory at e0800000 (32-bit, non-prefetchable) [size=4K] lspci -vnn: Memory at e0000000 (32-bit, non-prefetchable) [size=128K] lspci -vnn: [virtual] Expansion ROM at 40020000 [disabled] [size=32K] lspci -vnn: Capabilities: [60] Power Management version 2 lspci -vnn: lspci -vnn: 00:0b.0 Ethernet controller [0200]: 3Com Corporation 3c905C-TX/TX-M [Tornado] [10b7:9200] (rev 74) lspci -vnn: Subsystem: 3Com Corporation Unknown device [10b7:1000] lspci -vnn: Flags: bus master, medium devsel, latency 32, IRQ 10 lspci -vnn: I/O ports at b400 [size=128] lspci -vnn: Memory at df800000 (32-bit, non-prefetchable) [size=128] lspci -vnn: [virtual] Expansion ROM at 40000000 [disabled] [size=128K] lspci -vnn: Capabilities: [dc] Power Management version 2 lspci -vnn: lspci -vnn: 01:00.0 VGA compatible controller [0300]: nVidia Corporation NV4 [RIVA TNT] [10de:0020] (rev 04) lspci -vnn: Subsystem: Diamond Multimedia Systems Unknown device [1092:0550] lspci -vnn: Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 11 lspci -vnn: Memory at e1000000 (32-bit, non-prefetchable) [size=16M] lspci -vnn: Memory at e3000000 (32-bit, prefetchable) [size=16M] lspci -vnn: Expansion ROM at e2ff0000 [disabled] [size=64K] lspci -vnn: Capabilities: [60] Power Management version 1 lspci -vnn: Capabilities: [44] AGP version 1.0 lspci -vnn: modulemap: 8086:7111 piix modulemap: 8086:7112 uhci_hcd modulemap: 105a:3d17 sata_promise modulemap: 10b7:9200 3c59x lsmod: Module Size Used by lsmod: qnx4 10612 0 lsmod: ntfs 184084 0 lsmod: sha256 11136 0 lsmod: aes 28224 2 lsmod: dm_crypt 10888 1 lsmod: dm_mod 48952 12 dm_crypt lsmod: raid456 113168 0 lsmod: xor 14344 1 raid456 lsmod: raid1 19968 1 lsmod: raid0 7808 0 lsmod: md_mod 67860 4 raid456,raid1,raid0 lsmod: nls_iso8859_1 4096 0 lsmod: nls_cp437 5760 0 lsmod: xfs 464756 0 lsmod: reiserfs 210432 0 lsmod: jfs 156380 0 lsmod: ext3 116488 5 lsmod: jbd 47272 1 ext3 lsmod: vfat 11392 0 lsmod: fat 45596 1 vfat lsmod: isofs 31928 0 lsmod: ide_disk 14848 0 lsmod: ide_generic 1536 0 [permanent] lsmod: aec62xx 6912 0 [permanent] lsmod: alim15x3 11148 0 [permanent] lsmod: amd74xx 13084 0 [permanent] lsmod: atiixp 5904 0 [permanent] lsmod: cmd64x 10012 0 [permanent] lsmod: cs5520 4736 0 [permanent] lsmod: cs5530 4992 0 [permanent] lsmod: cs5535 4352 0 [permanent] lsmod: cy82c693 4484 0 [permanent] lsmod: hpt34x 5120 0 [permanent] lsmod: it821x 7940 0 [permanent] lsmod: jmicron 4224 0 [permanent] lsmod: ns87415 4296 0 [permanent] lsmod: opti621 4228 0 [permanent] lsmod: pdc202xx_new 8064 0 [permanent] lsmod: pdc202xx_old 9472 0 [permanent] lsmod: rz1000 2816 0 [permanent] lsmod: sc1200 6656 0 [permanent] lsmod: serverworks 8456 0 [permanent] lsmod: siimage 11136 0 [permanent] lsmod: sis5513 12552 0 [permanent] lsmod: slc90e66 5120 0 [permanent] lsmod: triflex 3840 0 [permanent] lsmod: trm290 4228 0 [permanent] lsmod: via82cxxx 8452 0 [permanent] lsmod: usb_storage 71360 0 lsmod: sd_mod 18832 6 lsmod: ide_cd 35616 0 lsmod: cdrom 32416 1 ide_cd lsmod: parport_pc 31524 0 lsmod: parport 32200 1 parport_pc lsmod: sata_promise 11396 4 lsmod: libata 87700 1 sata_promise lsmod: scsi_mod 121352 3 usb_storage,sd_mod,libata lsmod: piix 9220 0 [permanent] lsmod: generic 5508 0 [permanent] lsmod: ide_core 107760 31 ide_disk,ide_generic,aec62xx,alim15x3,amd74xx,atiixp,cmd64x,cs5520,cs5530,cs5535,cy82c693,hpt34x,it821x,jmicron,ns87415,opti621,pdc202xx_new,pdc202xx_old,rz1000,sc1200,serverworks,siimage,sis5513,slc90e66,triflex,trm290,via82cxxx,usb_storage,ide_cd,piix,generic lsmod: vga16fb 11148 2 lsmod: vgastate 7680 1 vga16fb lsmod: usbserial 28136 0 lsmod: usbhid 35552 0 lsmod: usbkbd 6656 0 lsmod: thermal 13320 0 lsmod: processor 23212 1 thermal lsmod: fan 4740 0 lsmod: floppy 51748 0 lsmod: uhci_hcd 19980 0 lsmod: 3c59x 40104 0 lsmod: mii 5248 1 3c59x lsmod: usbcore 108676 6 usb_storage,usbserial,usbhid,usbkbd,uhci_hcd df: Filesystem 1k-blocks Used Available Use% Mounted on df: tmpfs 388324 424 387900 0% /dev df: tmpfs 388324 424 387900 0% /dev df: tmpfs 388324 424 387900 0% /.dev df: /dev/mapper/vgsimba-lvroot 10321208 2424840 7372080 25% /target df: /dev/scsi/host1/bus0/target0/lun0/part1 186663 13078 163948 7% /target/boot df: /dev/scsi/host3/bus0/target0/lun0/part1 186663 5664 171362 3% /target/boot.bck df: /dev/mapper/vgsimba-lvhome 10321208 154252 9642668 2% /target/home df: /dev/mapper/vgsimba-lvbackup 218494860 191832 207204100 0% /target/mnt/backup free: total used free shared buffers free: Mem: 776652 758292 18360 0 55224 free: Swap: 1048568 4 1048564 free: Total: 1825220 758296 1066924 cardctl status: /usr/bin/report-hw: /usr/bin/report-hw: 50: cardctl: not found cardctl ident: /usr/bin/report-hw: /usr/bin/report-hw: 51: cardctl: not found
/proc/cpuinfo: processor : 0
/proc/cpuinfo: vendor_id : GenuineIntel
/proc/cpuinfo: cpu family : 6
/proc/cpuinfo: model : 5
/proc/cpuinfo: model name : Pentium II (Deschutes)
/proc/cpuinfo: stepping : 1
/proc/cpuinfo: cpu MHz : 334.112
/proc/cpuinfo: cache size : 512 KB
/proc/cpuinfo: fdiv_bug : no
/proc/cpuinfo: hlt_bug : no
/proc/cpuinfo: f00f_bug : no
/proc/cpuinfo: coma_bug : no
/proc/cpuinfo: fpu : yes
/proc/cpuinfo: fpu_exception : yes
/proc/cpuinfo: cpuid level : 2
/proc/cpuinfo: wp : yes
/proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr
/proc/cpuinfo: bogomips : 668.86
/proc/cpuinfo:
/proc/ioports: 0000-001f : dma1
/proc/ioports: 0020-0021 : pic1
/proc/ioports: 0040-0043 : timer0
/proc/ioports: 0050-0053 : timer1
/proc/ioports: 0060-006f : keyboard
/proc/ioports: 0080-008f : dma page reg
/proc/ioports: 00a0-00a1 : pic2
/proc/ioports: 00c0-00df : dma2
/proc/ioports: 00f0-00ff : fpu
/proc/ioports: 0170-0177 : ide1
/proc/ioports: 02f8-02ff : serial
/proc/ioports: 0376-0376 : ide1
/proc/ioports: 0378-037a : parport0
/proc/ioports: 037b-037f : parport0
/proc/ioports: 03c0-03df : vga+
/proc/ioports: 03f2-03f5 : floppy
/proc/ioports: 03f7-03f7 : floppy DIR
/proc/ioports: 03f8-03ff : serial
/proc/ioports: 0778-077a : parport0
/proc/ioports: 0cf8-0cff : PCI conf1
/proc/ioports: b400-b47f : 0000:00:0b.0
/proc/ioports: b800-b8ff : 0000:00:0a.0
/proc/ioports: b800-b8ff : sata_promise
/proc/ioports: d000-d07f : 0000:00:0a.0
/proc/ioports: d000-d07f : sata_promise
/proc/ioports: d400-d41f : 0000:00:04.2
/proc/ioports: d400-d41f : uhci_hcd
/proc/ioports: d800-d80f : 0000:00:04.1
/proc/ioports: d800-d807 : ide0
/proc/ioports: d808-d80f : ide1
/proc/ioports: e400-e43f : 0000:00:04.3
/proc/ioports: e400-e43f : motherboard
/proc/ioports: e400-e403 : ACPI PM1a_EVT_BLK
/proc/ioports: e404-e405 : ACPI PM1a_CNT_BLK
/proc/ioports: e408-e40b : ACPI PM_TMR
/proc/ioports: e40c-e40f : ACPI GPE0_BLK
/proc/ioports: e410-e415 : ACPI CPU throttle
/proc/ioports: e800-e80f : 0000:00:04.3
/proc/ioports: e800-e80f : motherboard
/proc/ioports: e800-e80f : pnp 00:03
/proc/iomem: 00000000-0009d3ff : System RAM
/proc/iomem: 00000000-00000000 : Crash kernel
/proc/iomem: 0009d400-0009ffff : reserved
/proc/iomem: 000a0000-000bffff : Video RAM area
/proc/iomem: 000c0000-000c87ff : Video ROM
/proc/iomem: 000cc000-000d0fff : Adapter ROM
/proc/iomem: 000d4000-000d47ff : Adapter ROM
/proc/iomem: 000f0000-000fffff : System ROM
/proc/iomem: 00100000-2ffebfff : System RAM
/proc/iomem: 00100000-00277829 : Kernel code
/proc/iomem: 0027782a-0030dc73 : Kernel data
/proc/iomem: 2ffec000-2ffeefff : ACPI Tables
/proc/iomem: 2ffef000-2fffefff : reserved
/proc/iomem: 2ffff000-2fffffff : ACPI Non-volatile Storage
/proc/iomem: 40000000-4001ffff : 0000:00:0b.0
/proc/iomem: 40020000-40027fff : 0000:00:0a.0
/proc/iomem: df800000-df80007f : 0000:00:0b.0
/proc/iomem: e0000000-e001ffff : 0000:00:0a.0
/proc/iomem: e0000000-e001ffff : sata_promise
/proc/iomem: e0800000-e0800fff : 0000:00:0a.0
/proc/iomem: e0800000-e0800fff : sata_promise
/proc/iomem: e1000000-e2dfffff : PCI Bus #01
/proc/iomem: e1000000-e1ffffff : 0000:01:00.0
/proc/iomem: e2f00000-e3ffffff : PCI Bus #01
/proc/iomem: e2ff0000-e2ffffff : 0000:01:00.0
/proc/iomem: e3000000-e3ffffff : 0000:01:00.0
/proc/iomem: e4000000-e7ffffff : 0000:00:00.0
/proc/iomem: ffff0000-ffffffff : reserved
/proc/interrupts: CPU0
/proc/interrupts: 0: 41746786 XT-PIC timer
/proc/interrupts: 1: 3698 XT-PIC i8042
/proc/interrupts: 2: 0 XT-PIC cascade
/proc/interrupts: 5: 17583572 XT-PIC libata
/proc/interrupts: 6: 32 XT-PIC floppy
/proc/interrupts: 7: 1 XT-PIC parport0
/proc/interrupts: 9: 0 XT-PIC acpi, uhci_hcd:usb1
/proc/interrupts: 10: 4960600 XT-PIC eth0
/proc/interrupts: 15: 894 XT-PIC ide1
/proc/interrupts: NMI: 0
/proc/interrupts: LOC: 0
/proc/interrupts: ERR: 0
/proc/interrupts: MIS: 0
/proc/meminfo: MemTotal: 776652 kB
/proc/meminfo: MemFree: 18360 kB
/proc/meminfo: Buffers: 55224 kB
/proc/meminfo: Cached: 612216 kB
/proc/meminfo: SwapCached: 0 kB
/proc/meminfo: Active: 311448 kB
/proc/meminfo: Inactive: 400552 kB
/proc/meminfo: HighTotal: 0 kB
/proc/meminfo: HighFree: 0 kB
/proc/meminfo: LowTotal: 776652 kB
/proc/meminfo: LowFree: 18360 kB
/proc/meminfo: SwapTotal: 1048568 kB
/proc/meminfo: SwapFree: 1048564 kB
/proc/meminfo: Dirty: 3252 kB
/proc/meminfo: Writeback: 0 kB
/proc/meminfo: AnonPages: 44600 kB
/proc/meminfo: Mapped: 2928 kB
/proc/meminfo: Slab: 37168 kB
/proc/meminfo: PageTables: 304 kB
/proc/meminfo: NFS_Unstable: 0 kB
/proc/meminfo: Bounce: 0 kB
/proc/meminfo: CommitLimit: 1436892 kB
/proc/meminfo: Committed_AS: 49600 kB
/proc/meminfo: VmallocTotal: 253648 kB
/proc/meminfo: VmallocUsed: 7480 kB
/proc/meminfo: VmallocChunk: 245740 kB
/proc/bus/input/devices: I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
/proc/bus/input/devices: N: Name="AT Translated Set 2 keyboard"
/proc/bus/input/devices: P: Phys=isa0060/serio0/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input0
/proc/bus/input/devices: H: Handlers=kbd
/proc/bus/input/devices: B: EV=120013
/proc/bus/input/devices: B: KEY=4 2000000 3802078 f840d001 feffffdf ffefffff ffffffff fffffffe
/proc/bus/input/devices: B: MSC=10
/proc/bus/input/devices: B: LED=7
/proc/bus/input/devices:
dmidecode: # dmidecode 2.8 dmidecode: SMBIOS 2.3 present. dmidecode: 45 structures occupying 1335 bytes. dmidecode: Table at 0x000F1F50. dmidecode: dmidecode: Handle 0x0000, DMI type 0, 20 bytes dmidecode: BIOS Information dmidecode: Vendor: Award Software, Inc. dmidecode: Version: ASUS P3B-F ACPI BIOS Revision 1008 Beta 004 dmidecode: Release Date: 10/15/2001 dmidecode: Address: 0xF0000 dmidecode: Runtime Size: 64 kB dmidecode: ROM Size: 256 kB dmidecode: Characteristics: dmidecode: ISA is supported dmidecode: PCI is supported dmidecode: PNP is supported dmidecode: APM is supported dmidecode: BIOS is upgradeable dmidecode: BIOS shadowing is allowed dmidecode: ESCD support is available dmidecode: Boot from CD is supported dmidecode: Selectable boot is supported dmidecode: BIOS ROM is socketed dmidecode: EDD is supported dmidecode: 5.25"/360 KB floppy services are supported (int 13h) dmidecode: 5.25"/1.2 MB floppy services are supported (int 13h) dmidecode: 3.5"/720 KB floppy services are supported (int 13h) dmidecode: 3.5"/2.88 MB floppy services are supported (int 13h) dmidecode: Print screen service is supported (int 5h) dmidecode: 8042 keyboard services are supported (int 9h) dmidecode: Serial services are supported (int 14h) dmidecode: Printer services are supported (int 17h) dmidecode: CGA/mono video services are supported (int 10h) dmidecode: ACPI is supported dmidecode: AGP is supported dmidecode: dmidecode: Handle 0x0001, DMI type 1, 25 bytes dmidecode: System Information dmidecode: Manufacturer: System Manufacturer dmidecode: Product Name: System Name dmidecode: Version: System Version dmidecode: Serial Number: SYS-1234567890 dmidecode: UUID: Not Settable dmidecode: Wake-up Type: Power Switch dmidecode: dmidecode: Handle 0x0002, DMI type 2, 8 bytes dmidecode: Base Board Information dmidecode: Manufacturer: ASUSTeK Computer INC. dmidecode: Product Name:dmidecode: Version: REV 1.xx dmidecode: Serial Number: xxxxxxxxxxx dmidecode: dmidecode: Handle 0x0003, DMI type 3, 17 bytes dmidecode: Chassis Information dmidecode: Manufacturer: Chassis Manufacture dmidecode: Type: Tower dmidecode: Lock: Not Present dmidecode: Version: Chassis Version dmidecode: Serial Number: Chassis Serial Number dmidecode: Asset Tag: Asset-1234567890 dmidecode: Boot-up State: Safe dmidecode: Power Supply State: Safe dmidecode: Thermal State: Safe dmidecode: Security Status: Unknown dmidecode: OEM Information: 0x00000000 dmidecode: dmidecode: Handle 0x0004, DMI type 4, 32 bytes dmidecode: Processor Information dmidecode: Socket Designation: SLOT 1 dmidecode: Type: Central Processor dmidecode: Family: Pentium II dmidecode: Manufacturer: genuine intel dmidecode: ID: 51 06 00 00 FF F9 83 01 dmidecode: Signature: Type 0, Family 6, Model 5, Stepping 1 dmidecode: Flags: dmidecode: FPU (Floating-point unit on-chip) dmidecode: VME (Virtual mode extension) dmidecode: DE (Debugging extension) dmidecode: PSE (Page size extension) dmidecode: TSC (Time stamp counter) dmidecode: MSR (Model specific registers) dmidecode: PAE (Physical address extension) dmidecode: MCE (Machine check exception) dmidecode: CX8 (CMPXCHG8 instruction supported) dmidecode: SEP (Fast system call) dmidecode: MTRR (Memory type range registers) dmidecode: PGE (Page global enable) dmidecode: MCA (Machine check architecture) dmidecode: CMOV (Conditional move instruction supported) dmidecode: PAT (Page attribute table) dmidecode: PSE-36 (36-bit page size extension) dmidecode: MMX (MMX technology supported) dmidecode: FXSR (Fast floating-point save and restore) dmidecode: Version: Intel Pentium II Processor dmidecode: Voltage: 2.9 V dmidecode: External Clock: 66 MHz dmidecode: Max Speed: 800 MHz dmidecode: Current Speed: 333 MHz dmidecode: Status: Populated, Enabled dmidecode: Upgrade: Slot 1 dmidecode: L1 Cache Handle: 0x000A dmidecode: L2 Cache Handle: 0x000B dmidecode: L3 Cache Handle: Not Provided dmidecode: dmidecode: Handle 0x0005, DMI type 5, 24 bytes dmidecode: Memory Controller Information dmidecode: Error Detecting Method: None dmidecode: Error Correcting Capabilities: dmidecode: Other dmidecode: Supported Interleave: Unknown dmidecode: Current Interleave: Unknown dmidecode: Maximum Memory Module Size: 256 MB dmidecode: Maximum Total Memory Size: 1024 MB dmidecode: Supported Speeds: dmidecode: 70 ns dmidecode: 60 ns dmidecode: 50 ns dmidecode: Supported Memory Types: dmidecode: DIMM dmidecode: SDRAM dmidecode: Memory Module Voltage: 3.3 V dmidecode: Associated Memory Slots: 4 dmidecode: 0x0006 dmidecode: 0x0007 dmidecode: 0x0008 dmidecode: 0x0009 dmidecode: Enabled Error Correcting Capabilities: dmidecode: Unknown dmidecode: dmidecode: Handle 0x0006, DMI type 6, 12 bytes dmidecode: Memory Module Information dmidecode: Socket Designation: DIMM 1 dmidecode: Bank Connections: 0 1 dmidecode: Current Speed: Unknown dmidecode: Type: DIMM SDRAM dmidecode: Installed Size: 256 MB (Double-bank Connection) dmidecode: Enabled Size: 256 MB (Double-bank Connection) dmidecode: Error Status: OK dmidecode: dmidecode: Handle 0x0007, DMI type 6, 12 bytes dmidecode: Memory Module Information dmidecode: Socket Designation: DIMM 2 dmidecode: Bank Connections: 2 3 dmidecode: Current Speed: Unknown dmidecode: Type: DIMM SDRAM dmidecode: Installed Size: 128 MB (Single-bank Connection) dmidecode: Enabled Size: 128 MB (Single-bank Connection) dmidecode: Error Status: OK dmidecode: dmidecode: Handle 0x0008, DMI type 6, 12 bytes dmidecode: Memory Module Information dmidecode: Socket Designation: DIMM 3 dmidecode: Bank Connections: 4 5 dmidecode: Current Speed: Unknown dmidecode: Type: DIMM SDRAM dmidecode: Installed Size: 256 MB (Double-bank Connection) dmidecode: Enabled Size: 256 MB (Double-bank Connection) dmidecode: Error Status: OK dmidecode: dmidecode: Handle 0x0009, DMI type 6, 12 bytes dmidecode: Memory Module Information dmidecode: Socket Designation: DIMM 4 dmidecode: Bank Connections: 6 7 dmidecode: Current Speed: Unknown dmidecode: Type: DIMM SDRAM dmidecode: Installed Size: 128 MB (Single-bank Connection) dmidecode: Enabled Size: 128 MB (Single-bank Connection) dmidecode: Error Status: OK dmidecode: dmidecode: Handle 0x000A, DMI type 7, 19 bytes dmidecode: Cache Information dmidecode: Socket Designation: L1 Cache dmidecode: Configuration: Enabled, Not Socketed, Level 1 dmidecode: Operational Mode: Write Back dmidecode: Location: Internal dmidecode: Installed Size: 32 KB dmidecode: Maximum Size: 32 KB dmidecode: Supported SRAM Types: dmidecode: Pipeline Burst dmidecode: Synchronous dmidecode: Installed SRAM Type: Pipeline Burst Synchronous dmidecode: Speed: Unknown dmidecode: Error Correction Type: Unknown dmidecode: System Type: Data dmidecode: Associativity: 4-way Set-associative dmidecode: dmidecode: Handle 0x000B, DMI type 7, 19 bytes dmidecode: Cache Information dmidecode: Socket Designation: L2 Cache dmidecode: Configuration: Enabled, Not Socketed, Level 2 dmidecode: Operational Mode: Write Back dmidecode: Location: Internal dmidecode: Installed Size: 512 KB dmidecode: Maximum Size: 512 KB dmidecode: Supported SRAM Types: dmidecode: Pipeline Burst dmidecode: Synchronous dmidecode: Installed SRAM Type: Pipeline Burst Synchronous dmidecode: Speed: Unknown dmidecode: Error Correction Type: Unknown dmidecode: System Type: Data dmidecode: Associativity: 4-way Set-associative dmidecode: dmidecode: Handle 0x000C, DMI type 8, 9 bytes dmidecode: Port Connector Information dmidecode: Internal Reference Designator: PRIMARY IDE/HDD dmidecode: Internal Connector Type: On Board IDE dmidecode: External Reference Designator: Not Specified dmidecode: External Connector Type: None dmidecode: Port Type: None dmidecode: dmidecode: Handle 0x000D, DMI type 8, 9 bytes dmidecode: Port Connector Information dmidecode: Internal Reference Designator: SECONDARY IDE/HDD dmidecode: Internal Connector Type: On Board IDE dmidecode: External Reference Designator: Not Specified dmidecode: External Connector Type: None dmidecode: Port Type: None dmidecode: dmidecode: Handle 0x000E, DMI type 8, 9 bytes dmidecode: Port Connector Information dmidecode: Internal Reference Designator: FLOPPY dmidecode: Internal Connector Type: On Board Floppy dmidecode: External Reference Designator: Not Specified dmidecode: External Connector Type: None dmidecode: Port Type: None dmidecode: dmidecode: Handle 0x000F, DMI type 8, 9 bytes dmidecode: Port Connector Information dmidecode: Internal Reference Designator: Not Specified dmidecode: Internal Connector Type: None dmidecode: External Reference Designator: USB1 dmidecode: External Connector Type: Access Bus (USB) dmidecode: Port Type: USB dmidecode: dmidecode: Handle 0x0010, DMI type 8, 9 bytes dmidecode: Port Connector Information dmidecode: Internal Reference Designator: Not Specified dmidecode: Internal Connector Type: None dmidecode: External Reference Designator: USB2 dmidecode: External Connector Type: Access Bus (USB) dmidecode: Port Type: USB dmidecode: dmidecode: Handle 0x0011, DMI type 8, 9 bytes dmidecode: Port Connector Information dmidecode: Internal Reference Designator: Not Specified dmidecode: Internal Connector Type: None dmidecode: External Reference Designator: PS/2 Keybaord dmidecode: External Connector Type: PS/2 dmidecode: Port Type: Keyboard Port dmidecode: dmidecode: Handle 0x0012, DMI type 8, 9 bytes dmidecode: Port Connector Information dmidecode: Internal Reference Designator: Not Specified dmidecode: Internal Connector Type: None dmidecode: External Reference Designator: PS/2 Mouse dmidecode: External Connector Type: PS/2 dmidecode: Port Type: Mouse Port dmidecode: dmidecode: Handle 0x0013, DMI type 8, 9 bytes dmidecode: Port Connector Information dmidecode: Internal Reference Designator: Not Specified dmidecode: Internal Connector Type: None dmidecode: External Reference Designator: Parallel Port dmidecode: External Connector Type: DB-25 female dmidecode: Port Type: Parallel Port ECP/EPP dmidecode: dmidecode: Handle 0x0014, DMI type 8, 9 bytes dmidecode: Port Connector Information dmidecode: Internal Reference Designator: Not Specified dmidecode: Internal Connector Type: None dmidecode: External Reference Designator: Serial Port dmidecode: External Connector Type: DB-9 male dmidecode: Port Type: Serial Port 16550 Compatible dmidecode: dmidecode: Handle 0x0015, DMI type 8, 9 bytes dmidecode: Port Connector Information dmidecode: Internal Reference Designator: Not Specified dmidecode: Internal Connector Type: None dmidecode: External Reference Designator: Serial Port dmidecode: External Connector Type: DB-9 male dmidecode: Port Type: Serial Port 16550 Compatible dmidecode: dmidecode: Handle 0x0016, DMI type 9, 13 bytes dmidecode: System Slot Information dmidecode: Designation: PCI 1 dmidecode: Type: 32-bit PCI dmidecode: Current Usage: Available dmidecode: Length: Short dmidecode: ID: 0 dmidecode: Characteristics: dmidecode: 5.0 V is provided dmidecode: 3.3 V is provided dmidecode: PME signal is supported dmidecode: dmidecode: Handle 0x0017, DMI type 9, 13 bytes dmidecode: System Slot Information dmidecode: Designation: PCI 2 dmidecode: Type: 32-bit PCI dmidecode: Current Usage: In Use dmidecode: Length: Short dmidecode: ID: 0 dmidecode: Characteristics: dmidecode: 5.0 V is provided dmidecode: 3.3 V is provided dmidecode: PME signal is supported dmidecode: dmidecode: Handle 0x0018, DMI type 9, 13 bytes dmidecode: System Slot Information dmidecode: Designation: PCI 3 dmidecode: Type: 32-bit PCI dmidecode: Current Usage: In Use dmidecode: Length: Short dmidecode: ID: 0 dmidecode: Characteristics: dmidecode: 5.0 V is provided dmidecode: 3.3 V is provided dmidecode: PME signal is supported dmidecode: dmidecode: Handle 0x0019, DMI type 9, 13 bytes dmidecode: System Slot Information dmidecode: Designation: PCI 4 dmidecode: Type: 32-bit PCI dmidecode: Current Usage: Available dmidecode: Length: Short dmidecode: ID: 0 dmidecode: Characteristics: dmidecode: 5.0 V is provided dmidecode: 3.3 V is provided dmidecode: PME signal is supported dmidecode: dmidecode: Handle 0x001A, DMI type 9, 13 bytes dmidecode: System Slot Information dmidecode: Designation: PCI 5 dmidecode: Type: 32-bit PCI dmidecode: Current Usage: In Use dmidecode: Length: Short dmidecode: ID: 0 dmidecode: Characteristics: dmidecode: 5.0 V is provided dmidecode: 3.3 V is provided dmidecode: PME signal is supported dmidecode: dmidecode: Handle 0x001B, DMI type 9, 13 bytes dmidecode: System Slot Information dmidecode: Designation: PCI 6 dmidecode: Type: 32-bit PCI dmidecode: Current Usage: In Use dmidecode: Length: Short dmidecode: ID: 0 dmidecode: Characteristics: dmidecode: 5.0 V is provided dmidecode: 3.3 V is provided dmidecode: PME signal is supported dmidecode: dmidecode: Handle 0x001C, DMI type 9, 13 bytes dmidecode: System Slot Information dmidecode: Designation: AGP dmidecode: Type: 32-bit AGP 2x dmidecode: Current Usage: In Use dmidecode: Length: Short dmidecode: ID: 0 dmidecode: Characteristics: dmidecode: 5.0 V is provided dmidecode: 3.3 V is provided dmidecode: dmidecode: Handle 0x001D, DMI type 9, 13 bytes dmidecode: System Slot Information dmidecode: Designation: ISA 1 dmidecode: Type: 16-bit ISA dmidecode: Current Usage: Unknown dmidecode: Length: Long dmidecode: Characteristics: dmidecode: 5.0 V is provided dmidecode: dmidecode: Handle 0x001E, DMI type 13, 22 bytes dmidecode: BIOS Language Information dmidecode: Installable Languages: 1 dmidecode: en|US|iso8859-1 dmidecode: Currently Installed Language: en|US|iso8859-1 dmidecode: dmidecode: Handle 0x001F, DMI type 14, 14 bytes dmidecode: Group Associations dmidecode: Name: Cpu Module dmidecode: Items: 3 dmidecode: 0x0004 (Processor) dmidecode: 0x000A (Cache) dmidecode: 0x000B (Cache) dmidecode: dmidecode: Handle 0x0020, DMI type 14, 35 bytes dmidecode: Group Associations dmidecode: Name: Memory Module Set dmidecode: Items: 10 dmidecode: 0x0021 (Physical Memory Array) dmidecode: 0x0022 (Memory Device) dmidecode: 0x0027 (Memory Device Mapped Address) dmidecode: 0x0023 (Memory Device) dmidecode: 0x0028 (Memory Device Mapped Address) dmidecode: 0x0024 (Memory Device) dmidecode: 0x0029 (Memory Device Mapped Address) dmidecode: 0x0025 (Memory Device) dmidecode: 0x002A (Memory Device Mapped Address) dmidecode: 0x0026 (Memory Array Mapped Address) dmidecode: dmidecode: Handle 0x0021, DMI type 16, 15 bytes dmidecode: Physical Memory Array dmidecode: Location: System Board Or Motherboard dmidecode: Use: System Memory dmidecode: Error Correction Type: None dmidecode: Maximum Capacity: 1 GB dmidecode: Error Information Handle: Not Provided dmidecode: Number Of Devices: 4 dmidecode: dmidecode: Handle 0x0022, DMI type 17, 23 bytes dmidecode: Memory Device dmidecode: Array Handle: 0x0021 dmidecode: Error Information Handle: No Error dmidecode: Total Width: 72 bits dmidecode: Data Width: 64 bits dmidecode: Size: 256 MB dmidecode: Form Factor: DIMM dmidecode: Set: 1 dmidecode: Locator: DIMM 1 dmidecode: Bank Locator: Not Specified dmidecode: Type: DRAM dmidecode: Type Detail: Synchronous dmidecode: Speed: Unknown dmidecode: dmidecode: Handle 0x0023, DMI type 17, 23 bytes dmidecode: Memory Device dmidecode: Array Handle: 0x0021 dmidecode: Error Information Handle: No Error dmidecode: Total Width: 72 bits dmidecode: Data Width: 64 bits dmidecode: Size: 128 MB dmidecode: Form Factor: DIMM dmidecode: Set: 2 dmidecode: Locator: DIMM 2 dmidecode: Bank Locator: Not Specified dmidecode: Type: DRAM dmidecode: Type Detail: Synchronous dmidecode: Speed: Unknown dmidecode: dmidecode: Handle 0x0024, DMI type 17, 23 bytes dmidecode: Memory Device dmidecode: Array Handle: 0x0021 dmidecode: Error Information Handle: No Error dmidecode: Total Width: 72 bits dmidecode: Data Width: 64 bits dmidecode: Size: 256 MB dmidecode: Form Factor: DIMM dmidecode: Set: 2 dmidecode: Locator: DIMM 3 dmidecode: Bank Locator: Not Specified dmidecode: Type: DRAM dmidecode: Type Detail: Synchronous dmidecode: Speed: Unknown dmidecode: dmidecode: Handle 0x0025, DMI type 17, 23 bytes dmidecode: Memory Device dmidecode: Array Handle: 0x0021 dmidecode: Error Information Handle: No Error dmidecode: Total Width: 72 bits dmidecode: Data Width: 64 bits dmidecode: Size: 128 MB dmidecode: Form Factor: DIMM dmidecode: Set: 2 dmidecode: Locator: DIMM 4 dmidecode: Bank Locator: Not Specified dmidecode: Type: DRAM dmidecode: Type Detail: Synchronous dmidecode: Speed: Unknown dmidecode: dmidecode: Handle 0x0026, DMI type 19, 15 bytes dmidecode: Memory Array Mapped Address dmidecode: Starting Address: 0x00000000000 dmidecode: Ending Address: 0x0C0000003FF dmidecode: Range Size: 805306369 kB dmidecode: Physical Array Handle: 0x0021 dmidecode: Partition Width: 0 dmidecode: dmidecode: Handle 0x0027, DMI type 20, 19 bytes dmidecode: Memory Device Mapped Address dmidecode: Starting Address: 0x00000000000 dmidecode: Ending Address: 0x0000FFFFFFF dmidecode: Range Size: 256 MB dmidecode: Physical Device Handle: 0x0022 dmidecode: Memory Array Mapped Address Handle: 0x0026 dmidecode: Partition Row Position: 1 dmidecode: dmidecode: Handle 0x0028, DMI type 20, 19 bytes dmidecode: Memory Device Mapped Address dmidecode: Starting Address: 0x00010000000 dmidecode: Ending Address: 0x00017FFFFFF dmidecode: Range Size: 128 MB dmidecode: Physical Device Handle: 0x0023 dmidecode: Memory Array Mapped Address Handle: 0x0026 dmidecode: Partition Row Position: 2 dmidecode: dmidecode: Handle 0x0029, DMI type 20, 19 bytes dmidecode: Memory Device Mapped Address dmidecode: Starting Address: 0x00018000000 dmidecode: Ending Address: 0x00027FFFFFF dmidecode: Range Size: 256 MB dmidecode: Physical Device Handle: 0x0024 dmidecode: Memory Array Mapped Address Handle: 0x0026 dmidecode: Partition Row Position: 3 dmidecode: dmidecode: Handle 0x002A, DMI type 20, 19 bytes dmidecode: Memory Device Mapped Address dmidecode: Starting Address: 0x00028000000 dmidecode: Ending Address: 0x0002FFFFFFF dmidecode: Range Size: 128 MB dmidecode: Physical Device Handle: 0x0025 dmidecode: Memory Array Mapped Address Handle: 0x0026 dmidecode: Partition Row Position: 4 dmidecode: dmidecode: Handle 0x002B, DMI type 32, 11 bytes dmidecode: System Boot Information dmidecode: Status: No errors detected dmidecode: dmidecode: Handle 0x002C, DMI type 127, 4 bytes dmidecode: End Of Table dmidecode: ============================================== Installer status: ============================================== Package: serial-modules-2.6.18-4-486-di Status: install ok unpacked Version: 1.44 Provides: serial-modules Depends: kernel-image-2.6.18-4-486-di, pcmcia-modules-2.6.18-4-486-di Description: Serial drivers Package: preseed-common Status: install ok unpacked Version: 1.28 Depends: cdebconf-udeb, di-utils (>= 1.14) Description: common files for preseeding Package: udpkg Status: install ok unpacked Version: 1.04 Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.41) Description: tiny dpkg clone Package: localechooser Status: install ok installed Version: 1.37 Depends: cdebconf-udeb, iso-3166-udeb, di-utils (>= 1.15) Description: choose language/country/locale Installer-Menu-Item: 10 Package: libnss-dns-udeb Status: install ok unpacked Version: 2.3.6.ds1-13 Description: GNU C Library: NSS helper for DNS - udeb Package: nic-shared-modules-2.6.18-4-486-di Status: install ok unpacked Version: 1.44 Provides: nic-shared-modules Depends: kernel-image-2.6.18-4-486-di Description: Shared NIC drivers Package: download-installer Status: install ok installed Version: 1.15 Depends: cdebconf-udeb, net-retriever, anna (>= 1.07) Description: Download installer components Installer-Menu-Item: 23 Package: nic-pcmcia-modules-2.6.18-4-486-di Status: install ok unpacked Version: 1.44 Provides: nic-pcmcia-modules Depends: kernel-image-2.6.18-4-486-di, nic-shared-modules-2.6.18-4-486-di, nic-extra-modules-2.6.18-4-486-di, pcmcia-modules-2.6.18-4-486-di Description: Common PCMCIA NIC drivers Package: lowmemcheck Status: install ok unpacked Version: 1.25 Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03) Description: detect low-memory systems and enter lowmem mode Package: main-menu Status: install ok unpacked Version: 1.18 Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), cdebconf-udeb Description: Debian installer main menu Package: di-utils-shell Status: install ok unpacked Version: 1.45 Depends: cdebconf-udeb, di-utils (>= 1.18) Description: Execute a shell Installer-Menu-Item: 950 Package: di-utils Status: install ok installed Version: 1.45 Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.49), cdebconf-udeb Description: Miscellaneous utilities for the debian installer Package: fb-modules-2.6.18-4-486-di Status: install ok unpacked Version: 1.44 Provides: fb-modules Depends: kernel-image-2.6.18-4-486-di Description: Frame buffer support Package: choose-mirror Status: install ok installed Version: 2.13 Depends: configured-network, choose-mirror-bin Description: Choose mirror to install from (menu item) Installer-Menu-Item: 23 Package: network-preseed Status: install ok unpacked Version: 1.28 Depends: cdebconf-udeb, configured-network, preseed-common Description: download debconf preseed file Installer-Menu-Item: 21 Package: kernel-image-2.6.18-4-486-di Status: install ok unpacked Version: 1.44 Provides: kernel-image, ext2-modules Description: Linux kernel binary image for the Debian installer Package: cdebconf-newt-udeb Status: install ok unpacked Version: 0.114 Depends: cdebconf-udeb, di-utils-terminfo, libc6 (>= 2.3.6-6), libnewt0.52 Description: Newt frontend for Debian Configuration Management System Package: usb-modules-2.6.18-4-486-di Status: install ok unpacked Version: 1.44 Provides: usb-modules Depends: kernel-image-2.6.18-4-486-di Description: USB support Package: module-init-tools-udeb Status: install ok unpacked Version: 3.3-pre4-2 Depends: libc6 (>= 2.3.6-6) Description: tools for managing Linux kernel modules Package: gpgv-udeb Status: install ok installed Version: 1.4.6-1 Depends: libc6 (>= 2.3.6-6), zlib1g-udeb (>= 1:1.2.1) Description: minimal signature verification tool Package: rootskel Status: install ok installed Version: 1.50 Depends: di-utils (>= 1.43), cdebconf-udeb Description: Skeleton root filesystem used by debian-installer Package: udev-udeb Status: install ok unpacked Version: 0.105-3 Depends: libc6 (>= 2.3.6-6) Description: /dev/ and hotplug management daemon Package: brltty-udeb Status: install ok unpacked Version: 3.7.2-7 Depends: libc6 (>= 2.3.6-6) Description: Access software for a blind person using a soft braille terminal Package: libfribidi0-udeb Status: install ok unpacked Version: 0.10.7-4 Depends: libc6 (>= 2.3.6-6) Description: Free Implementation of the Unicode BiDi algorithm Package: libtextwrap1-udeb Status: install ok installed Version: 0.1-5 Depends: libc6 (>= 2.3.6-6) Description: text-wrapping library with i18n - runtime udeb Package: auto-install Status: install ok unpacked Version: 0.03 Depends: cdebconf-udeb, netcfg, preseed-common (>= 1.18) Description: Support for automatic installs Installer-Menu-Item: 19 Package: usb-discover Status: install ok unpacked Version: 1.06 Depends: cdebconf-udeb Description: Discover USB and load kernel modules Package: rescue-check Status: install ok unpacked Version: 1.9 Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03), di-utils (>= 1.18) Description: enter d-i rescue mode if requested Package: nano-udeb Status: install ok unpacked Version: 2.0.2-1 Provides: editor Depends: libc6 (>= 2.3.6-6), libslang2-udeb (>= 2.0.6-3) Description: free Pico clone with some new features - tiny build Package: cdebconf-udeb Status: install ok installed Version: 0.114 Provides: debconf-2.0 Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.50), libtextwrap1-udeb Description: Debian Configuration Management System (C-implementation) Package: nic-modules-2.6.18-4-486-di Status: install ok unpacked Version: 1.44 Provides: nic-modules Depends: kernel-image-2.6.18-4-486-di, nic-shared-modules-2.6.18-4-486-di, firmware-modules-2.6.18-4-486-di, firewire-core-modules-2.6.18-4-486-di Description: Common NIC drivers Package: ai-choosers Status: install ok unpacked Version: 0.03 Depends: kbd-chooser (>= 1.30), localechooser (>= 1.23) Description: Delayed configuration of locale and keyboard for auto-install Installer-Menu-Item: 22 Package: libiw28-udeb Status: install ok installed Version: 28-1 Depends: libc6 (>= 2.3.5-1) Description: Tools for manipulating Linux Wireless Extensions Package: pcmcia-modules-2.6.18-4-486-di Status: install ok unpacked Version: 1.44 Provides: pcmcia-modules Depends: kernel-image-2.6.18-4-486-di, firmware-modules-2.6.18-4-486-di Description: Common PCMCIA drivers Package: cdebconf-text-udeb Status: install ok unpacked Version: 0.114 Depends: cdebconf-udeb, libc6 (>= 2.3.6-6) Description: Plain text frontend for Debian Configuration Management System Package: acpi-modules-2.6.18-4-486-di Status: install ok unpacked Version: 1.44 Provides: acpi-modules Depends: kernel-image-2.6.18-4-486-di Description: ACPI support modules Package: iso-3166-udeb Status: install ok installed Version: 1.0a-1 Description: provides iso_3166.tab file Package: floppy-modules-2.6.18-4-486-di Status: install ok unpacked Version: 1.44 Provides: floppy-modules Depends: kernel-image-2.6.18-4-486-di Description: Floppy driver Package: usb-serial-modules-2.6.18-4-486-di Status: install ok unpacked Version: 1.44 Provides: usb-serial-modules Depends: kernel-image-2.6.18-4-486-di, usb-modules-2.6.18-4-486-di Description: USB serial drivers Package: floppy-retriever Status: install ok unpacked Version: 1.14 Provides: retriever Depends: cdebconf-udeb, mountfloppy Description: Fetches modules from a floppy Package: ethdetect Status: install ok installed Version: 1.50 Provides: ethernet-card-detection Depends: rootskel (>= 1.30), cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13) Description: Detect network hardware and load kernel drivers for it Installer-Menu-Item: 17 Package: busybox-udeb Status: install ok unpacked Version: 1:1.1.3-4 Depends: libc6 (>= 2.3.6-6) Description: Tiny utilities for the debian-installer Package: initrd-preseed Status: install ok unpacked Version: 1.28 Depends: preseed-common Description: load debconf preseed file from /preseed.cfg on the initrd Package: net-retriever Status: install ok installed Version: 1.15 Provides: retriever Depends: cdebconf-udeb, choose-mirror, configured-network, di-utils (>= 1.16), gpgv-udeb Description: Fetch modules from the Internet Package: archdetect Status: install ok installed Version: 1.50 Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.50) Description: Hardware architecture detector Package: save-logs Status: install ok unpacked Version: 2.29 Depends: cdebconf-udeb Description: save logs and configuration for debug purposes Installer-Menu-Item: 940 Package: di-utils-reboot Status: install ok unpacked Version: 1.45 Depends: cdebconf-udeb Description: Reboot Installer-Menu-Item: 995 Package: anna Status: install ok installed Version: 1.27 Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), cdebconf-udeb Description: anna's not nearly apt, but for the Debian installer, it will do Package: nic-extra-modules-2.6.18-4-486-di Status: install ok unpacked Version: 1.44 Provides: nic-extra-modules Depends: kernel-image-2.6.18-4-486-di, nic-shared-modules-2.6.18-4-486-di, firmware-modules-2.6.18-4-486-di, crc-modules-2.6.18-4-486-di Description: Rare NIC drivers Package: libsysfs2-udeb Status: install ok unpacked Version: 2.1.0-1 Provides: libsysfs2