Pantek Library
Hosting Provided By
CybrHost
High Speed Hosting

Bug#435872: installation-reports: hp rx2600 serial console missing getty entry, post-install

From: Alex Chiang <achiang(at)hp.com>
Date: Fri Aug 03 2007 - 15:43:21 EDT


Package: installation-reports
Severity: important

  • Please type your report below this line ***
    • Package-specific info:

Boot method: netinstall CD
Image version:
Date: <Date and time of the install>

Machine: hp rx2600 (ia64)
Partitions: <df -Tl will do; the raw partition table is preferred>

Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot:           [O]
Detect network card:    [O]
Configure network:      [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Install base system:    [O]
Clock/timezone setup:   [O]
User/password setup:    [O]
Install tasks:          [O]
Install boot loader:    [O]
Overall install:        [E]

Comments/Problems:

Installation works fine. After install, upon initial reboot, system appears to "hang". In reality, there is no getty entry in /etc/inittab for the serial console

Adding this line to /etc/inittab fixed the problem:

T0:23:respawn:/sbin/getty -L ttyS3 9600 vt100

Do you need help?X

Additionally, there were some odd errors on boot:



Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled 00:04: ttyS0 at MMIO 0xff5e0000 (irq = 49) is a 16550A 00:05: ttyS1 at MMIO 0xff5e2000 (irq = 50) is a 16550A GSI 82 (level, low) -> CPU 1 (0x0100) vector 51
ACPI: PCI Interrupt 0000:e0:01.0[A] -> GSI 82 (level, low) -> IRQ 51
0000:e0:01.0: ttyS2 at MMIO 0xf8051000 (irq = 51) is a 16550A
ACPI: PCI Interrupt 0000:e0:01.1[A] -> GSI 82 (level, low) -> IRQ 51
0000:e0:01.1: ttyS3 at MMIO 0xf8050000 (irq = 51) is a 16550A
Couldn't register serial port 0000:e0:01.1: -28

[...]

Adding console on ttyS3 at MMIO 0xf8050000 (options '9600n8')


Why are we saying that the console is a serial device that we couldn't register? That's weird.

-- 

Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report. Please compress large files using gzip.

Once you have filled out this report, mail it to submit@bugs.debian.org.

==============================================
Installer lsb-release:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="4.0 (installer build 20070308)"
X_INSTALLATION_MEDIUM=cdrom

==============================================
Installer hardware-summary:
==============================================
umame -a: Linux lc-ia64.fc.hp.com 2.6.18-4-itanium #1 SMP Wed Feb 21 14:35:08 UTC 2007 ia64 unknown
lspci -nn: 00:01.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 41)
lspci -nn: 00:01.1 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 41)
lspci -nn: 00:01.2 USB Controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev 02)
lspci -nn: 00:02.0 IDE interface [0101]: Silicon Image, Inc. SiI 0649 Ultra ATA/100 PCI to ATA Host Controller [1095:0649] (rev 02)
lspci -nn: 00:03.0 Ethernet controller [0200]: Intel Corporation 82557/8/9 [Ethernet Pro 100] [8086:1229] (rev 0d)
Do you need more help?X
lspci -nn: 20:01.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI [1000:0030] (rev 07) lspci -nn: 20:01.1 SCSI storage controller [0100]: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI [1000:0030] (rev 07) lspci -nn: 20:02.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5701 Gigabit Ethernet [14e4:1645] (rev 15) lspci -nn: e0:01.0 Communication controller [0780]: Hewlett-Packard Company Auxiliary Diva Serial Port [103c:1290] (rev 01) lspci -nn: e0:01.1 Serial controller [0700]: Hewlett-Packard Company Diva Serial [GSP] Multiport UART [103c:1048] (rev 03) lspci -nn: e0:02.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE] [1002:5159] lspci -vnn: 00:01.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 41) (prog-if 10) lspci -vnn: Subsystem: NEC Corporation USB [1033:0035] lspci -vnn: Flags: bus master, medium devsel, latency 128, IRQ 52 lspci -vnn: Memory at 80023000 (32-bit, non-prefetchable) [size=4K] lspci -vnn: Capabilities: [40] Power Management version 2 lspci -vnn: lspci -vnn: 00:01.1 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 41) (prog-if 10) lspci -vnn: Subsystem: NEC Corporation USB [1033:0035] lspci -vnn: Flags: bus master, medium devsel, latency 128, IRQ 53 lspci -vnn: Memory at 80022000 (32-bit, non-prefetchable) [size=4K] lspci -vnn: Capabilities: [40] Power Management version 2 lspci -vnn: lspci -vnn: 00:01.2 USB Controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev 02) (prog-if 20) lspci -vnn: Subsystem: NEC Corporation USB 2.0 [1033:00e0]
Can we help you?X
lspci -vnn: Flags: bus master, medium devsel, latency 128, IRQ 55 lspci -vnn: Memory at 80021000 (32-bit, non-prefetchable) [size=256] lspci -vnn: Capabilities: [40] Power Management version 2 lspci -vnn: lspci -vnn: 00:02.0 IDE interface [0101]: Silicon Image, Inc. SiI 0649 Ultra ATA/100 PCI to ATA Host Controller [1095:0649] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO]) lspci -vnn: Subsystem: Silicon Image, Inc. SiI 0649 Ultra ATA/100 PCI to ATA Host Controller [1095:0649] lspci -vnn: Flags: bus master, medium devsel, latency 64, IRQ 57 lspci -vnn: I/O ports at 0d58 [size=8] lspci -vnn: I/O ports at 0d64 [size=4] lspci -vnn: I/O ports at 0d50 [size=8] lspci -vnn: I/O ports at 0d60 [size=4] lspci -vnn: I/O ports at 0d40 [size=16] lspci -vnn: Capabilities: [60] Power Management version 2 lspci -vnn: lspci -vnn: 00:03.0 Ethernet controller [0200]: Intel Corporation 82557/8/9 [Ethernet Pro 100] [8086:1229] (rev 0d) lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device [103c:1274] lspci -vnn: Flags: bus master, medium devsel, latency 128, IRQ 59 lspci -vnn: Memory at 80020000 (32-bit, non-prefetchable) [size=4K] lspci -vnn: I/O ports at 0d00 [size=64] lspci -vnn: Memory at 80000000 (32-bit, non-prefetchable) [size=128K] lspci -vnn: Capabilities: [dc] Power Management version 2 lspci -vnn: lspci -vnn: 20:01.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI [1000:0030] (rev 07) lspci -vnn: Subsystem: LSI Logic / Symbios Logic Unknown device [1000:1000] lspci -vnn: Flags: bus master, 66MHz, medium devsel, latency 192, IRQ 54 lspci -vnn: I/O ports at 2100 [size=256] lspci -vnn: Memory at 90840000 (64-bit, non-prefetchable) [size=64K] lspci -vnn: Memory at 90830000 (64-bit, non-prefetchable) [size=64K]
Can't find what you're looking for?X
lspci -vnn: Expansion ROM at 90400000 [disabled] [size=4M] lspci -vnn: Capabilities: [50] Power Management version 2 lspci -vnn: Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- lspci -vnn: lspci -vnn: 20:01.1 SCSI storage controller [0100]: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI [1000:0030] (rev 07) lspci -vnn: Subsystem: LSI Logic / Symbios Logic Unknown device [1000:1000] lspci -vnn: Flags: bus master, 66MHz, medium devsel, latency 192, IRQ 56 lspci -vnn: I/O ports at 2000 [size=256] lspci -vnn: Memory at 90820000 (64-bit, non-prefetchable) [size=64K] lspci -vnn: Memory at 90810000 (64-bit, non-prefetchable) [size=64K] lspci -vnn: Expansion ROM at 90000000 [disabled] [size=4M] lspci -vnn: Capabilities: [50] Power Management version 2 lspci -vnn: Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- lspci -vnn: lspci -vnn: 20:02.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5701 Gigabit Ethernet [14e4:1645] (rev 15) lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device [103c:12a4] lspci -vnn: Flags: bus master, 66MHz, medium devsel, latency 192, IRQ 58 lspci -vnn: Memory at 90800000 (64-bit, non-prefetchable) [size=64K] lspci -vnn: Capabilities: [40] PCI-X non-bridge device lspci -vnn: Capabilities: [48] Power Management version 2 lspci -vnn: Capabilities: [50] Vital Product Data lspci -vnn: Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3 Enable- lspci -vnn: lspci -vnn: e0:01.0 Communication controller [0780]: Hewlett-Packard Company Auxiliary Diva Serial Port [103c:1290] (rev 01) lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device [103c:1291]
Don't know where to look next?X
lspci -vnn: Flags: bus master, medium devsel, latency 128, IRQ 51 lspci -vnn: Memory at f8051000 (32-bit, non-prefetchable) [size=16] lspci -vnn: Capabilities: [48] Power Management version 2 lspci -vnn: lspci -vnn: e0:01.1 Serial controller [0700]: Hewlett-Packard Company Diva Serial [GSP] Multiport UART [103c:1048] (rev 03) (prog-if 02) lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device [103c:1282] lspci -vnn: Flags: medium devsel, IRQ 51 lspci -vnn: Memory at f8050000 (32-bit, non-prefetchable) [size=4K] lspci -vnn: Memory at f8020000 (32-bit, prefetchable) [size=128K] lspci -vnn: Capabilities: [48] Power Management version 2 lspci -vnn: lspci -vnn: e0:02.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE] [1002:5159] lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device [103c:12ab] lspci -vnn: Flags: bus master, stepping, medium devsel, latency 128, IRQ 255 lspci -vnn: Memory at f0000000 (32-bit, prefetchable) [size=128M] lspci -vnn: I/O ports at e000 [size=256] lspci -vnn: Memory at f8040000 (32-bit, non-prefetchable) [size=64K] lspci -vnn: Expansion ROM at f8000000 [disabled] [size=128K] lspci -vnn: Capabilities: [50] Power Management version 2 lspci -vnn: modulemap: 1033:0035 ohci_hcd modulemap: 1033:0035 ohci_hcd modulemap: 1033:00e0 ehci_hcd modulemap: 1095:0649 cmd64x modulemap: 8086:1229 e100 modulemap: 1000:0030 mptspi modulemap: 1000:0030 mptspi modulemap: 14e4:1645 tg3 lsmod: Module Size Used by lsmod: nls_iso8859_1 10464 0 lsmod: nls_cp437 12192 0 lsmod: ntfs 433552 0 lsmod: efivars 22596 0 lsmod: xfs 1139792 0
Confused? Frustrated?X
lsmod: reiserfs 573156 0 lsmod: jfs 373196 0 lsmod: ext3 291528 2 lsmod: jbd 136920 1 ext3 lsmod: mbcache 21584 1 ext3 lsmod: vfat 31224 0 lsmod: fat 114304 1 vfat lsmod: e100 75120 0 lsmod: mii 15672 1 e100 lsmod: tg3 236280 0 lsmod: isofs 85860 0 lsmod: ide_disk 37096 0 lsmod: ide_generic 5760 0 [permanent] lsmod: pdc202xx_new 21848 0 [permanent] lsmod: aec62xx 18200 0 [permanent] lsmod: alim15x3 26456 0 [permanent] lsmod: cs5520 12536 0 [permanent] lsmod: cs5530 14565 0 [permanent] lsmod: cy82c693 12368 0 [permanent] lsmod: hpt34x 13656 0 [permanent] lsmod: it821x 20132 0 [permanent] lsmod: ns87415 12516 0 [permanent] lsmod: opti621 12372 0 [permanent] lsmod: pdc202xx_old 24608 0 [permanent] lsmod: piix 21528 0 [permanent] lsmod: sc1200 18461 0 [permanent] lsmod: serverworks 21864 0 [permanent] lsmod: sgiioc4 21744 0 [permanent] lsmod: ioc4 18048 1 sgiioc4 lsmod: siimage 29351 0 [permanent] lsmod: slc90e66 14408 0 [permanent] lsmod: triflex 10752 0 [permanent] lsmod: trm290 12666 0 [permanent] lsmod: via82cxxx 22340 0 [permanent] lsmod: usb_storage 162707 0 lsmod: ide_cd 84968 0 lsmod: cdrom 79864 1 ide_cd lsmod: usbhid 95836 0
Call Pantek today for Open Source Technical Support at 1-877-546-8934 - 24/7/365X
lsmod: usbkbd 17664 0 lsmod: sd_mod 44940 4 lsmod: cmd64x 25384 0 [permanent] lsmod: generic 12396 0 [permanent] lsmod: ide_core 243036 26 ide_disk,ide_generic,pdc202xx_new,aec62xx,alim15x3,cs5520,cs5530,cy82c693,hpt34x,it821x,ns87415,opti621,pdc202xx_old,piix,sc1200,serverworks,sgiioc4,siimage,slc90e66,triflex,trm290,via82cxxx,usb_storage,ide_cd,cmd64x,generic lsmod: mptspi 36072 3 lsmod: mptscsih 49432 1 mptspi lsmod: ehci_hcd 72592 0 lsmod: mptbase 104504 2 mptspi,mptscsih lsmod: scsi_transport_spi 57208 1 mptspi lsmod: ohci_hcd 51056 0 lsmod: scsi_mod 256696 5 usb_storage,sd_mod,mptspi,mptscsih,scsi_transport_spi lsmod: usbcore 269776 6 usb_storage,usbhid,usbkbd,ehci_hcd,ohci_hcd df: Filesystem 1k-blocks Used Available Use% Mounted on df: tmpfs 2068016 1616 2066400 0% /dev df: tmpfs 2068016 1616 2066400 0% /dev df: tmpfs 2068016 1616 2066400 0% /.dev df: /dev/scsi/host0/bus0/target0/lun0/part4 30547780 744960 28251064 3% /target df: /dev/scsi/host0/bus0/target0/lun0/part2 483886 22548 436338 5% /target/boot free: total used free shared buffers free: Mem: 4136032 1246656 2889376 0 112816 free: Swap: 3906208 0 3906208 free: Total: 8042240 1246656 6795584 cardctl status: /usr/bin/report-hw: /usr/bin/report-hw: 48: pccardctl: not found cardctl ident: /usr/bin/report-hw: /usr/bin/report-hw: 49: pccardctl: not found
Do you need help?X
cardctl status: /usr/bin/report-hw: /usr/bin/report-hw: 50: cardctl: not found cardctl ident: /usr/bin/report-hw: /usr/bin/report-hw: 51: cardctl: not found
/proc/cpuinfo: processor : 0
/proc/cpuinfo: vendor : GenuineIntel
/proc/cpuinfo: arch : IA-64
/proc/cpuinfo: family : Itanium 2
/proc/cpuinfo: model : 0
/proc/cpuinfo: revision : 7
/proc/cpuinfo: archrev : 0
/proc/cpuinfo: features : branchlong
/proc/cpuinfo: cpu number : 0
/proc/cpuinfo: cpu regs : 4
/proc/cpuinfo: cpu MHz : 900.000000
/proc/cpuinfo: itc MHz : 900.000000
/proc/cpuinfo: BogoMIPS : 1347.58
/proc/cpuinfo: siblings : 1
/proc/cpuinfo:
/proc/cpuinfo: processor : 1
/proc/cpuinfo: vendor : GenuineIntel
/proc/cpuinfo: arch : IA-64
/proc/cpuinfo: family : Itanium 2
/proc/cpuinfo: model : 0
/proc/cpuinfo: revision : 7
/proc/cpuinfo: archrev : 0
/proc/cpuinfo: features : branchlong
/proc/cpuinfo: cpu number : 0
/proc/cpuinfo: cpu regs : 4
/proc/cpuinfo: cpu MHz : 900.000000
/proc/cpuinfo: itc MHz : 900.000000
/proc/cpuinfo: BogoMIPS : 4.08
/proc/cpuinfo: siblings : 1
/proc/cpuinfo:
/proc/ioports: 00000000-000003af : PCI Bus 0000:00
/proc/ioports: 000003b0-000003df : PCI Bus 0000:e0
/proc/ioports: 000003c0-000003df : vga+
/proc/ioports: 000003e0-00001fff : PCI Bus 0000:00
/proc/ioports: 00000d00-00000d3f : 0000:00:03.0
/proc/ioports: 00000d00-00000d3f : e100
/proc/ioports: 00000d40-00000d4f : 0000:00:02.0
/proc/ioports: 00000d40-00000d47 : ide0
/proc/ioports: 00000d48-00000d4f : ide1
/proc/ioports: 00000d50-00000d57 : 0000:00:02.0
/proc/ioports: 00000d58-00000d5f : 0000:00:02.0
/proc/ioports: 00000d58-00000d5f : ide0
/proc/ioports: 00000d60-00000d63 : 0000:00:02.0
/proc/ioports: 00000d64-00000d67 : 0000:00:02.0
/proc/ioports: 00000d66-00000d66 : ide0
/proc/ioports: 00002000-00002fff : PCI Bus 0000:20
/proc/ioports: 00002000-000020ff : 0000:20:01.1
/proc/ioports: 00002100-000021ff : 0000:20:01.0
/proc/ioports: 00003000-00005fff : PCI Bus 0000:40
/proc/ioports: 00006000-00007fff : PCI Bus 0000:60
/proc/ioports: 00008000-0000bfff : PCI Bus 0000:80
/proc/ioports: 0000c000-0000dfff : PCI Bus 0000:c0
/proc/ioports: 0000e000-0000ffff : PCI Bus 0000:e0
/proc/ioports: 0000e000-0000e0ff : 0000:e0:02.0
/proc/iomem: 00000000-00000fff : System RAM
/proc/iomem: 00001000-0009ffff : System RAM
/proc/iomem: 000a0000-000fffff : PCI Bus 0000:e0
/proc/iomem: 000c0000-000fffff : reserved
/proc/iomem: 00100000-03ffffff : System RAM
/proc/iomem: 04000000-04773fff : System RAM
/proc/iomem: 04000000-044c787f : Kernel code
/proc/iomem: 044c7880-04773def : Kernel data
/proc/iomem: 04774000-3f5e3fff : System RAM
/proc/iomem: 3f5e4000-3fabffff : reserved
/proc/iomem: 3fac0000-3fafffff : reserved
/proc/iomem: 3fb00000-3fb0ffff : System RAM
/proc/iomem: 3fb10000-3fb2bfff : System RAM
/proc/iomem: 3fb2c000-3fb37fff : reserved
/proc/iomem: 3fb38000-3fffffff : reserved
/proc/iomem: 80000000-8fffffff : PCI Bus 0000:00
/proc/iomem: 80000000-8001ffff : 0000:00:03.0
/proc/iomem: 80000000-8001ffff : e100
/proc/iomem: 80020000-80020fff : 0000:00:03.0
/proc/iomem: 80020000-80020fff : e100
/proc/iomem: 80021000-800210ff : 0000:00:01.2
/proc/iomem: 80021000-800210ff : ehci_hcd
/proc/iomem: 80022000-80022fff : 0000:00:01.1
/proc/iomem: 80022000-80022fff : ohci_hcd
/proc/iomem: 80023000-80023fff : 0000:00:01.0
/proc/iomem: 80023000-80023fff : ohci_hcd
/proc/iomem: 90000000-97ffffff : PCI Bus 0000:20
/proc/iomem: 90000000-903fffff : 0000:20:01.1
/proc/iomem: 90400000-907fffff : 0000:20:01.0
/proc/iomem: 90800000-9080ffff : 0000:20:02.0
/proc/iomem: 90800000-9080ffff : tg3
/proc/iomem: 90810000-9081ffff : 0000:20:01.1
/proc/iomem: 90820000-9082ffff : 0000:20:01.1
/proc/iomem: 90830000-9083ffff : 0000:20:01.0
/proc/iomem: 90840000-9084ffff : 0000:20:01.0
/proc/iomem: 98000000-afffffff : PCI Bus 0000:40
/proc/iomem: b0000000-c7ffffff : PCI Bus 0000:60
/proc/iomem: c8000000-dfffffff : PCI Bus 0000:80
/proc/iomem: e0000000-efffffff : PCI Bus 0000:c0
/proc/iomem: f0000000-fdffffff : PCI Bus 0000:e0
/proc/iomem: f0000000-f7ffffff : 0000:e0:02.0
/proc/iomem: f8000000-f801ffff : 0000:e0:02.0
/proc/iomem: f8020000-f803ffff : 0000:e0:01.1
/proc/iomem: f8040000-f804ffff : 0000:e0:02.0
/proc/iomem: f8050000-f8050fff : 0000:e0:01.1
/proc/iomem: f8050000-f8050007 : serial
/proc/iomem: f8051000-f805100f : 0000:e0:01.0
/proc/iomem: f8051000-f8051007 : serial
/proc/iomem: ff5c1004-ff5c1007 : ACPI PM_TMR
/proc/iomem: ff5c1008-ff5c100b : ACPI PM1a_EVT_BLK
/proc/iomem: ff5c100c-ff5c100d : ACPI PM1a_CNT_BLK
/proc/iomem: ff5c1010-ff5c1013 : ACPI GPE0_BLK
/proc/iomem: ff5c1014-ff5c1017 : ACPI GPE1_BLK
/proc/iomem: ff5e0000-ff5e0007 : PCI Bus 0000:20
/proc/iomem: ff5e0000-ff5e0007 : serial
/proc/iomem: ff5e2000-ff5e2007 : PCI Bus 0000:20
/proc/iomem: ff5e2000-ff5e2007 : serial
/proc/iomem: 4040000000-40fea13fff : System RAM
/proc/iomem: 40fea14000-40fef9ffff : System RAM
/proc/iomem: 40fefa0000-40fefa0fff : System RAM
/proc/iomem: 40fefa1000-40feffdfff : System RAM
/proc/iomem: 40feffe000-40ff2d1fff : System RAM
/proc/iomem: 40ff2d2000-40ff2d3fff : System RAM
/proc/iomem: 40ff2d4000-40ff2d5fff : System RAM
/proc/iomem: 40ff2d6000-40ff800fff : System RAM
/proc/iomem: 40ff801000-40ff801fff : System RAM
/proc/iomem: 40ff802000-40ff9f9fff : System RAM
/proc/iomem: 40ff9fa000-40ff9fafff : System RAM
/proc/iomem: 40ff9fb000-40ff9fdfff : System RAM
/proc/iomem: 40ff9fe000-40ffd67fff : System RAM
/proc/iomem: 40ffd68000-40ffda3fff : reserved
/proc/iomem: 40ffda4000-40ffdfdfff : System RAM
/proc/iomem: 40ffdfe000-40ffe0ffff : System RAM
/proc/iomem: 40ffe10000-40ffe7dfff : reserved
/proc/iomem: 40ffe7e000-40fffbffff : System RAM
/proc/iomem: 40fffc0000-40ffffffff : reserved
/proc/iomem: 80004000000-80103fffffe : PCI Bus 0000:00
/proc/iomem: 90004000000-90103fffffe : PCI Bus 0000:20
/proc/iomem: a0004000000-a0103fffffe : PCI Bus 0000:40
/proc/iomem: b0004000000-b0103fffffe : PCI Bus 0000:60
/proc/iomem: c0004000000-c0103fffffe : PCI Bus 0000:80
/proc/iomem: e0004000000-e0103fffffe : PCI Bus 0000:c0
/proc/iomem: f0004000000-f0103fffffe : PCI Bus 0000:e0
/proc/iomem: 3fffffc000000-3fffffc0eb3af : PCI Bus 0000:00 I/O Ports 00000000-000003af
/proc/iomem: 3fffffc0ec3b0-3fffffc0f73df : PCI Bus 0000:e0 I/O Ports 000003b0-000003df
/proc/iomem: 3fffffc0f83e0-3fffffc7fffff : PCI Bus 0000:00 I/O Ports 000003e0-00001fff
/proc/iomem: 3fffffc800000-3fffffcbfffff : PCI Bus 0000:20 I/O Ports 00002000-00002fff
/proc/iomem: 3fffffcc00000-3fffffd7fffff : PCI Bus 0000:40 I/O Ports 00003000-00005fff
/proc/iomem: 3fffffd800000-3fffffdffffff : PCI Bus 0000:60 I/O Ports 00006000-00007fff
/proc/iomem: 3fffffe000000-3fffffeffffff : PCI Bus 0000:80 I/O Ports 00008000-0000bfff
/proc/iomem: 3ffffff000000-3ffffff7fffff : PCI Bus 0000:c0 I/O Ports 0000c000-0000dfff
/proc/iomem: 3ffffff800000-3ffffffffffff : PCI Bus 0000:e0 I/O Ports 0000e000-0000ffff
/proc/interrupts: CPU0 CPU1
/proc/interrupts: 28: 5 5 LSAPIC cpe_poll
/proc/interrupts: 29: 0 0 LSAPIC cmc_poll
/proc/interrupts: 31: 0 0 LSAPIC cmc_hndlr
/proc/interrupts: 48: 0 0 IO-SAPIC-level acpi
/proc/interrupts: 51: 0 6194 IO-SAPIC-level serial
/proc/interrupts: 52: 0 0 IO-SAPIC-level ohci_hcd:usb1
/proc/interrupts: 53: 0 0 IO-SAPIC-level ohci_hcd:usb2
/proc/interrupts: 54: 43318 0 IO-SAPIC-level ioc0
/proc/interrupts: 55: 0 0 IO-SAPIC-level ehci_hcd:usb3
/proc/interrupts: 56: 45 0 IO-SAPIC-level ioc1
/proc/interrupts: 57: 0 1846 IO-SAPIC-level ide0
/proc/interrupts: 59: 0 34386 IO-SAPIC-level eth1
/proc/interrupts: 232: 0 0 LSAPIC mca_rdzv
/proc/interrupts: 238: 0 0 LSAPIC perfmon
/proc/interrupts: 239: 664342 630521 LSAPIC timer
/proc/interrupts: 240: 0 0 LSAPIC mca_wkup
/proc/interrupts: 254: 104 211 LSAPIC IPI
/proc/interrupts: ERR: 0
/proc/meminfo: MemTotal: 4136032 kB
/proc/meminfo: MemFree: 2889200 kB
/proc/meminfo: Buffers: 112816 kB
/proc/meminfo: Cached: 793872 kB
/proc/meminfo: SwapCached: 0 kB
/proc/meminfo: Active: 646448 kB
/proc/meminfo: Inactive: 283280 kB
/proc/meminfo: HighTotal: 0 kB
/proc/meminfo: HighFree: 0 kB
/proc/meminfo: LowTotal: 4136032 kB
/proc/meminfo: LowFree: 2889200 kB
/proc/meminfo: SwapTotal: 3906208 kB
/proc/meminfo: SwapFree: 3906208 kB
/proc/meminfo: Dirty: 5072 kB
/proc/meminfo: Writeback: 0 kB
/proc/meminfo: AnonPages: 22480 kB
/proc/meminfo: Mapped: 3872 kB
/proc/meminfo: Slab: 67760 kB
/proc/meminfo: PageTables: 1200 kB
/proc/meminfo: NFS_Unstable: 0 kB
/proc/meminfo: Bounce: 0 kB
/proc/meminfo: CommitLimit: 5974224 kB
/proc/meminfo: Committed_AS: 32176 kB
/proc/meminfo: VmallocTotal: 137429633024 kB
/proc/meminfo: VmallocUsed: 29760 kB
/proc/meminfo: VmallocChunk: 137429602032 kB
/proc/meminfo: HugePages_Total: 0
/proc/meminfo: HugePages_Free: 0
/proc/meminfo: HugePages_Rsvd: 0
/proc/meminfo: Hugepagesize: 262144 kB
dmidecode: /usr/bin/report-hw: /usr/bin/report-hw: 57: dmidecode: not found ============================================== Installer status: ============================================== Package: preseed-common Status: install ok unpacked Version: 1.28 Depends: cdebconf-udeb, di-utils (>= 1.14) Description: common files for preseeding Package: udpkg Status: install ok unpacked Version: 1.04 Depends: libc6.1 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.41) Description: tiny dpkg clone Package: localechooser Status: install ok installed Version: 1.37 Depends: cdebconf-udeb, iso-3166-udeb, di-utils (>= 1.15) Description: choose language/country/locale Installer-Menu-Item: 10 Package: serial-modules-2.6.18-4-itanium-di Status: install ok unpacked Version: 1.18 Provides: serial-modules Depends: kernel-image-2.6.18-4-itanium-di, pcmcia-modules-2.6.18-4-itanium-di, sn-modules-2.6.18-4-itanium-di Description: Serial drivers Package: libnss-dns-udeb Status: install ok unpacked Version: 2.3.6.ds1-13 Description: GNU C Library: NSS helper for DNS - udeb Package: input-modules-2.6.18-4-itanium-di Status: install ok unpacked Version: 1.18 Provides: input-modules Depends: kernel-image-2.6.18-4-itanium-di, usb-modules-2.6.18-4-itanium-di Description: Input devices support Package: cdrom-checker Status: install ok unpacked Version: 1.11 Depends: cdrom-detect, cdebconf-udeb (>= 0.31) Description: Verify the cd contents Installer-Menu-Item: 940 Package: lowmemcheck Status: install ok unpacked Version: 1.25 Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03) Description: detect low-memory systems and enter lowmem mode
Do you need more help?X
Package: cdrom-retriever Status: install ok installed Version: 1.14 Provides: retriever Depends: cdebconf-udeb, cdrom-detect Description: Fetch modules from a CDROM Package: main-menu Status: install ok unpacked Version: 1.18 Depends: libc6.1 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), cdebconf-udeb Description: Debian installer main menu Package: di-utils-shell Status: install ok unpacked Version: 1.45 Depends: cdebconf-udeb, di-utils (>= 1.18) Description: Execute a shell Installer-Menu-Item: 950 Package: cdrom-core-modules-2.6.18-4-itanium-di Status: install ok unpacked Version: 1.18 Provides: cdrom-core-modules Depends: kernel-image-2.6.18-4-itanium-di, scsi-core-modules-2.6.18-4-itanium-di, ide-modules-2.6.18-4-itanium-di Description: CDROM support Package: di-utils Status: install ok installed Version: 1.45 Depends: libc6.1 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.49), cdebconf-udeb Description: Miscellaneous utilities for the debian installer Package: cdebconf-newt-udeb Status: install ok unpacked Version: 0.114 Depends: cdebconf-udeb, di-utils-terminfo, libc6.1 (>= 2.3.5-1), libnewt0.52 Description: Newt frontend for Debian Configuration Management System Package: module-init-tools-udeb Status: install ok unpacked Version: 3.3-pre4-2 Depends: libc6.1 (>= 2.3.5-1) Description: tools for managing Linux kernel modules Package: parport-modules-2.6.18-4-itanium-di Status: install ok unpacked Version: 1.18 Provides: parport-modules Depends: kernel-image-2.6.18-4-itanium-di Description: Parallel port support Package: rootskel Status: install ok installed Version: 1.50 Depends: di-utils (>= 1.43), cdebconf-udeb Description: Skeleton root filesystem used by debian-installer Package: usb-storage-modules-2.6.18-4-itanium-di Status: install ok unpacked
Can we help you?X
Version: 1.18 Provides: usb-storage-modules Depends: ide-core-modules-2.6.18-4-itanium-di, scsi-core-modules-2.6.18-4-itanium-di, usb-modules-2.6.18-4-itanium-di Description: USB storage support Package: udev-udeb Status: install ok unpacked Version: 0.105-3 Depends: libc6.1 (>= 2.3.5-1) Description: /dev/ and hotplug management daemon Package: usb-modules-2.6.18-4-itanium-di Status: install ok unpacked Version: 1.18 Provides: usb-modules Depends: kernel-image-2.6.18-4-itanium-di Description: USB support Package: brltty-udeb Status: install ok unpacked Version: 3.7.2-7 Depends: libc6.1 (>= 2.3.5-1) Description: Access software for a blind person using a soft braille terminal Package: libfribidi0-udeb Status: install ok unpacked Version: 0.10.7-4 Depends: libc6.1 (>= 2.3.5-1) Description: Free Implementation of the Unicode BiDi algorithm Package: kernel-image-2.6.18-4-itanium-di Status: install ok unpacked Version: 1.18 Provides: kernel-image Description: Linux kernel binary image for the Debian installer Package: libtextwrap1-udeb Status: install ok installed Version: 0.1-5 Depends: libc6.1 (>= 2.3.5-1) Description: text-wrapping library with i18n - runtime udeb Package: auto-install Status: install ok unpacked Version: 0.03 Depends: cdebconf-udeb, netcfg, preseed-common (>= 1.18) Description: Support for automatic installs Installer-Menu-Item: 19 Package: usb-discover Status: install ok unpacked Version: 1.06 Depends: cdebconf-udeb Description: Discover USB and load kernel modules Package: rescue-check Status: install ok unpacked Version: 1.9 Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03), di-utils (>= 1.18) Description: enter d-i rescue mode if requested Package: nano-udeb Status: install ok unpacked Version: 2.0.2-1 Provides: editor Depends: libc6.1 (>= 2.3.5-1), libslang2-udeb (>= 2.0.6-3)
Can't find what you're looking for?X
Description: free Pico clone with some new features - tiny build Package: cdebconf-udeb Status: install ok installed Version: 0.114 Provides: debconf-2.0 Depends: libc6.1 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.50), libtextwrap1-udeb Description: Debian Configuration Management System (C-implementation) Package: sn-modules-2.6.18-4-itanium-di Status: install ok unpacked Version: 1.18 Provides: sn-modules Depends: kernel-image-2.6.18-4-itanium-di Description: SN modules Package: ai-choosers Status: install ok unpacked Version: 0.03 Depends: kbd-chooser (>= 1.30), localechooser (>= 1.23) Description: Delayed configuration of locale and keyboard for auto-install Installer-Menu-Item: 22 Package: scsi-modules-2.6.18-4-itanium-di Status: install ok unpacked Version: 1.18 Provides: scsi-modules Depends: kernel-image-2.6.18-4-itanium-di, scsi-core-modules-2.6.18-4-itanium-di, parport-modules-2.6.18-4-itanium-di, cdrom-core-modules-2.6.18-4-itanium-di, firmware-modules-2.6.18-4-itanium-di Description: SCSI drivers Package: libiw28-udeb Status: install ok installed Version: 28-1 Depends: libc6.1 (>= 2.3.5-1) Description: Tools for manipulating Linux Wireless Extensions Package: load-cdrom Status: install ok installed Version: 1.14 Depends: cdebconf-udeb, cdrom-retriever, anna (>= 1.07) Description: Load installer components from CD Installer-Menu-Item: 16 Package: cdebconf-text-udeb Status: install ok unpacked Version: 0.114 Depends: cdebconf-udeb, libc6.1 (>= 2.3.5-1) Description: Plain text frontend for Debian Configuration Management System Package: scsi-core-modules-2.6.18-4-itanium-di Status: install ok unpacked Version: 1.18 Provides: scsi-core-modules Depends: kernel-image-2.6.18-4-itanium-di Description: Core SCSI subsystem
Don't know where to look next?X
Package: iso-3166-udeb Status: install ok installed Version: 1.0a-1 Description: provides iso_3166.tab file Package: floppy-retriever Status: install ok unpacked Version: 1.14 Provides: retriever Depends: cdebconf-udeb, mountfloppy Description: Fetches modules from a floppy Package: ethdetect Status: install ok installed Version: 1.50 Provides: ethernet-card-detection Depends: rootskel (>= 1.30), cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13) Description: Detect network hardware and load kernel drivers for it Installer-Menu-Item: 17 Package: busybox-udeb Status: install ok unpacked Version: 1:1.1.3-4 Depends: libc6.1 (>= 2.3.5-1) Description: Tiny utilities for the debian-installer Package: initrd-preseed Status: install ok unpacked Version: 1.28 Depends: preseed-common Description: load debconf preseed file from /preseed.cfg on the initrd Package: pcmcia-modules-2.6.18-4-itanium-di Status: install ok unpacked Version: 1.18 Provides: pcmcia-modules Depends: firmware-modules-2.6.18-4-itanium-di Description: Common PCMCIA drivers Package: archdetect Status: install ok installed Version: 1.50 Depends: libc6.1 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.50) Description: Hardware architecture detector Package: firmware-modules-2.6.18-4-itanium-di Status: install ok unpacked Version: 1.18 Provides: firmware-modules Depends: kernel-image-2.6.18-4-itanium-di Description: Firmware request modules Package: save-logs Status: install ok unpacked Version: 2.29 Depends: cdebconf-udeb Description: save logs and configuration for debug purposes Installer-Menu-Item: 940 Package: di-utils-reboot Status: install ok unpacked Version: 1.45 Depends: cdebconf-udeb Description: Reboot Installer-Menu-Item: 995 Package: anna Status: install ok installed Version: 1.27
Confused? Frustrated?X
Depends: libc6.1 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), cdebconf-udeb Description: anna's not nearly apt, but for the Debian installer, it will do Package: pciutils-udeb Status: install ok unpacked Version: 1:2.2.4~pre4-1 Depends: libc6.1 (>= 2.3.5-1) Description: Linux PCI Utilities (udeb) Package: console-keymaps-at Status: install ok installed Version: 2:1.01-7 Provides: console-keymaps Depends: cdebconf-udeb Description: Keymaps for PC-style (PS/2 and AT) keyboards Package: di-utils-terminfo Status: install ok unpacked Version: 1.45 Description: Terminfo entries needed by newt/slang in debian installer Package: efi-reader Status: install ok unpacked Version: 0.9 Description: Select default values from EFI configuration. Package: scsi-common-modules-2.6.18-4-itanium-di Status: install ok unpacked Version: 1.18 Provides: scsi-common-modules Depends: kernel-image-2.6.18-4-itanium-di, scsi-core-modules-2.6.18-4-itanium-di, cdrom-core-modules-2.6.18-4-itanium-di Description: Very common SCSI drivers Package: hw-detect Status: install ok installed Version: 1.50 Depends: rootskel (>= 1.30), archdetect, cdebconf-udeb (>= 0.75), di-utils (>= 1.26) Description: Detect hardware and load kernel drivers for it Package: kbd-chooser Status: install ok installed Version: 1.34 Depends: libc6.1 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), cdebconf-udeb, console-keymaps Description: Detect a keyboard and select layout Installer-Menu-Item: 12 Package: libdebian-installer4-udeb Status: install ok installed Version: 0.50 Depends: libc6.1 (>= 2.3.5-1) Description: Library of common debian-installer functions Package: ide-core-modules-2.6.18-4-itanium-di Status: install ok unpacked Version: 1.18 Provides: ide-core-modules
Call Pantek today for Open Source Technical Support at 1-877-546-8934 - 24/7/365X
Depends: kernel-image-2.6.18-4-itanium-di Description: IDE support Package: installation-locale Status: install ok unpacked Version: 1.1 Depends: rootskel Description: UTF-8 C locale Package: env-preseed Status: install ok unpacked Version: 1.28 Description: debconf preseeding via environment variables Package: mountfloppy Status: install ok unpacked Version: 0.11 Depends: cdebconf-udeb, di-utils (>= 1.15) Description: Mounts a floppy Package: cdebconf-priority Status: install ok unpacked Version: 0.114 Depends: cdebconf-udeb Description: Change debconf priority Installer-Menu-Item: 930 Package: netcfg Status: install ok installed Version: 1.36 Provides: configured-network Depends: libc6.1 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), libiw28-udeb (>= 28), dhcp-client-udeb | dhcp3-client-udeb | pump-udeb, ethernet-card-detection Description: Configure the network Installer-Menu-Item: 18 Package: file-preseed Status: install ok unpacked Version: 1.28 Depends: cdebconf-udeb, di-utils, preseed-common Description: load debconf preseed file Installer-Menu-Item: 14 Package: ide-modules-2.6.18-4-itanium-di Status: install ok unpacked Version: 1.18 Provides: ide-modules Depends: kernel-image-2.6.18-4-itanium-di, ide-core-modules-2.6.18-4-itanium-di, sn-modules-2.6.18-4-itanium-di Description: IDE drivers Package: libdebconfclient0-udeb Status: install ok installed Version: 0.114 Depends: libc6.1 (>= 2.3.5-1), cdebconf-udeb Description: Debian Configuration Management System (C-implementation) Package: bogl-bterm-udeb Status: install ok unpacked Version: 0.1.18-1.5 Provides: editor Depends: libc-udeb Description: Ben's Own Graphics Library - graphical terminal Package: cdrom-detect Status: install ok installed Version: 1.20 Depends: cdebconf-udeb, hw-detect, di-utils (>= 1.33)
Do you need help?X
Description: Detect CDROM devices and mount the CD Installer-Menu-Item: 13 Package: debian-installer Status: install ok installed Version: cdrom-20070308 Description: debian installation image Package: zlib1g-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 184 Maintainer: Mark Brown Version: 1:1.2.3-13 Provides: zlib1g Description: compression library - runtime for Debian installer zlib is a library implementing the deflate compression method found in gzip and PKZIP. This minimal package includes the shared library for use with the Debian installer. Package: apt-cdrom-setup Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 44 Maintainer: Debian Install System Team Version: 1:0.20 Depends: cdrom-detect, cdebconf-udeb Provides: apt-mirror-setup Description: set up a CD in sources.list Package: apt-mirror-setup Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 160 Maintainer: Debian Install System Team Version: 1:0.20 Depends: choose-mirror-bin, cdebconf-udeb Description: set up a mirror in sources.list Package: apt-setup-udeb Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 104 Maintainer: Debian Install System Team Version: 1:0.20 Depends: apt-mirror-setup, base-installer (>= 1.49), cdebconf-udeb Description: Configure apt Installer-Menu-Item: 70 Package: base-installer Status: install ok installed Priority: required Section: debian-installer Installed-Size: 644 Maintainer: Debian Install System Team
Do you need more help?X
Version: 1.76 Depends: libc6.1 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), mounted-partitions, debootstrap-udeb (>= 0.3.1), created-fstab, archdetect, di-utils-mapdevfs, di-utils (>= 1.16), rootskel (>= 1.19), gpgv-udeb Provides: kernel-installer Description: Install the base system Installer-Menu-Item: 65 Package: choose-mirror-bin Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 336 Maintainer: Debian Install System Team Version: 2.13 Depends: libc6.1 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), cdebconf-udeb Description: Choose mirror to install from (program) Package: clock-setup Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 76 Maintainer: Debian Install System Team Version: 0.15 Depends: cdebconf-udeb, os-prober, tzsetup-udeb Description: set up clock Installer-Menu-Item: 62 Package: crc-modules-2.6.18-4-itanium-di Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 40 Maintainer: Debian Install System Team Version: 1.18 Depends: kernel-image-2.6.18-4-itanium-di Provides: crc-modules Description: CRC modules This package contains CRC support modules. Package: debootstrap-udeb Status: install ok installed Priority: required Section: debian-installer Installed-Size: 184 Maintainer: Anthony Towns Version: 0.3.3.2 Depends: libc6.1 (>= 2.3.5-1), mounted-partitions Description: Bootstrap the Debian system debootstrap is used to create a Debian base system from scratch, without requiring the availability of dpkg or apt. It does this by downloading .deb files from a mirror site, and carefully unpacking them
Can we help you?X
into a directory which can eventually be chrooted into. . debootstrap-udeb is a minimal package used by debian-installer. Package: dhcp-client-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 352 Maintainer: Eloy A. Paris Version: 2.0pl5-19.5 Depends: libc6.1 (>= 2.3.5-1) Description: DHCP Client for debian-installer dhcp-client-udeb is a minimal dhcp package used by the debian-installer. Package: di-utils-mapdevfs Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 20 Maintainer: Debian Install System Team Version: 1.45 Depends: libc6.1 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.49) Description: mapdevfs utility for the debian installer Package: disk-detect Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 64 Maintainer: Debian Install System Team Version: 1.50 Depends: cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13) Provides: harddrive-detection Description: Detect disk drives Installer-Menu-Item: 35 Package: e2fsprogs-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 792 Maintainer: Theodore Y. Ts'o Version: 1.39+1.40-WIP-2006.11.14+dfsg-2 Depends: libblkid1-udeb, libc6.1 (>= 2.3.5-1) Description: stripped-down versions of e2fsprogs, for debian-installer This package is an e2fsprogs package built for a reduced size, so that it can help to save space in debian-installer. . Don't attempt to install this package, it has no support for a couple of features you surely want. Anyway it should refuse to install.
Can't find what you're looking for?X
Package: efi-modules-2.6.18-4-itanium-di Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 64 Maintainer: Debian Install System Team Version: 1.18 Depends: kernel-image-2.6.18-4-itanium-di Provides: efi-modules Description: EFI modules This package contains EFI modules. Package: elilo-installer Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 100 Maintainer: Debian Install System Team Version: 1.10 Depends: cdebconf-udeb, base-installer, partconf-find-partitions (>= 1.08), di-utils-mapdevfs, fat-modules, efi-modules Provides: bootable-system Description: Install elilo on a hard disk Installer-Menu-Item: 76 Package: ext3-modules-2.6.18-4-itanium-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 624 Maintainer: Debian Install System Team Version: 1.18 Depends: kernel-image-2.6.18-4-itanium-di Provides: ext3-modules Description: EXT3 filesystem support This package contains the EXT3 filesystem module for the Linux kernel. Package: fat-modules-2.6.18-4-itanium-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 252 Maintainer: Debian Install System Team Version: 1.18 Depends: kernel-image-2.6.18-4-itanium-di Provides: fat-modules Description: FAT filesystem support This package contains the FAT and VFAT filesystem modules for the Linux kernel. Package: finish-install Status: install ok unpacked Priority: required Section: debian-installer Installed-Size: 108 Maintainer: Debian Install System Team Version: 2.9 Depends: cdebconf-udeb, archdetect, base-installer, created-fstab, bootable-system
Don't know where to look next?X
Provides: prebaseconfig Description: Finish the installation and reboot Installer-Menu-Item: 78 Package: firewire-core-modules-2.6.18-4-itanium-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 956 Maintainer: Debian Install System Team Version: 1.18 Depends: scsi-core-modules-2.6.18-4-itanium-di, kernel-image-2.6.18-4-itanium-di Provides: firewire-core-modules Description: Core FireWire drivers This package contains core FireWire drivers for the Linux kernel. Package: gpgv-udeb Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 636 Maintainer: James Troup Version: 1.4.6-2 Depends: libc6.1 (>= 2.3.5-1), zlib1g-udeb (>= 1:1.2.1) Description: minimal signature verification tool GnuPG is GNU's tool for secure communication and data storage. It can be used to encrypt data and to create digital signatures. It includes an advanced key management facility and is compliant with the proposed OpenPGP Internet standard as described in RFC2440. . This is GnuPG's signature verification tool, gpgv, packaged in minimal form for use in debian-installer. Package: jfs-modules-2.6.18-4-itanium-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 484 Maintainer: Debian Install System Team Version: 1.18 Depends: kernel-image-2.6.18-4-itanium-di Provides: jfs-modules Description: JFS filesystem support This package contains the JFS filesystem module for the Linux kernel. Package: jfsutils-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 1468 Maintainer: Stefan Hornburg (Racke)
Confused? Frustrated?X
Version: 1.1.11-1 Depends: libc6.1 (>= 2.3.5-1), libuuid1-udeb Description: A stripped-down version of jfsutils, for debian-installer This package is a jfsutils package built for reduced size, so that it can help to save space in debian-installer. . Don't attempt to install this package, it has no support for a couple of features you surely want. Anyway, it should fail to install. Package: libblkid1-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 76 Maintainer: Theodore Y. Ts'o Version: 1.39+1.40-WIP-2006.11.14+dfsg-2 Depends: libc6.1 (>= 2.3.5-1) Provides: libblkid1 Description: block device id library The blkid library which allows system programs like fsck and mount to quickly and easily find block devices by filesystem UUID and LABEL. This allows system administrators to avoid specifiying filesystems by hard-coded device names, but via a logical naming system instead. . This is a minimal package for debian-installer. Package: libc6.1-udeb Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 3576 Maintainer: GNU Libc Maintainers Version: 2.3.6.ds1-13 Provides: libc6.1, libc-udeb, glibc-2.3.6.ds1-1, glibc-2.3.6-2 Description: GNU C Library: Shared libraries - udeb Contains the standard libraries that are used by nearly all programs on the system. This package includes shared versions of the standard C library and the standard math library, as well as many others. . This package contains a minimal set of libraries needed for the Debian installer. Do not install it on a normal system. Package: libdevmapper1.02-udeb Status: install ok installed Priority: optional Section: debian-installer
Call Pantek today for Open Source Technical Support at 1-877-546-8934 - 24/7/365X
Installed-Size: 132 Maintainer: Debian LVM Team Version: 2:1.02.08-1 Depends: libc6.1 (>= 2.3.5-1) Provides: libdevmapper1.02 Description: The Linux Kernel Device Mapper userspace library This is a udeb, or a microdeb, for the debian-installer. . The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management) Team's implementation of a minimalistic kernel-space driver that handles volume management, while keeping knowledge of the underlying device layout in user-space. This makes it useful for not only LVM, but EVMS, software raid, and other drivers that create "virtual" block devices. Package: libparted1.7-udeb Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 712 Maintainer: Parted Maintainer Team Version: 1.7.1-5.1 Depends: libc6.1 (>= 2.3.5-1), libuuid1-udeb Provides: libparted1.7-1 Description: The GNU Parted disk partitioning shared library GNU Parted is a program that allows you to create, destroy, resize, move and copy hard disk partitions. This is useful for creating space for new operating systems, reorganising disk usage, and copying data to new hard disks. This package contains the Parted binary and manual page. . This package contains libparted, the required shared library used by Parted. This is a cut-down package with no normal documentation intended to be used in debian-installer. . Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and PC98 disklabels/partition tables, as well as a 'loop' (raw disk) type which allows use on RAID/LVM. Filesystems which are currently fully supported are ext2, ext3, fat (FAT16 and FAT32), ReiserFS (with libreiserfs) and linux-swap.
Do you need help?X
Parted can also detect and remove HFS (Mac OS), JFS, NTFS, UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems, but cannot create, resize or check these filesystems yet. . Note that ReiserFS support is only enabled if you install the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been removed from sarge, ReiserFS support is not compiled in the default package. . The nature of this software means that any bugs could cause massive data loss. While there are no known bugs at the moment, they could exist, so please back up all important files before running it, and do so at your own risk. Package: libuuid1-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 32 Maintainer: Theodore Y. Ts'o Version: 1.39+1.40-WIP-2006.11.14+dfsg-2 Depends: libc6.1 (>= 2.3.5-1) Provides: libuuid1 Description: universally unique id library libuuid generates and parses 128-bit universally unique id's (UUID's). See RFC 4122 for more information. . This is a minimal package for debian-installer. Package: loop-modules-2.6.18-4-itanium-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 76 Maintainer: Debian Install System Team Version: 1.18 Depends: kernel-image-2.6.18-4-itanium-di Provides: loop-modules Description: Loopback filesystem support This package contains loopback filesystem support for the Linux kernel. Package: lvm2-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 880 Maintainer: Debian LVM Team Version: 2.02.06-4 Depends: libc6.1 (>= 2.3.5-1), libdevmapper1.02-udeb (>= 2:1.02.02-2)
Do you need more help?X
Description: The Linux Logical Volume Manager This is a udeb, or a microdeb, for the debian-installer. . This is LVM2, the rewrite of The Linux Logical Volume Manager. LVM supports enterprise level volume management of disk and disk subsystems by grouping arbitrary disks into volume groups. The total capacity of volume groups can be allocated to logical volumes, which are accessed as regular block devices. Package: md-modules-2.6.18-4-itanium-di Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 936 Maintainer: Debian Install System Team Version: 1.18 Depends: kernel-image-2.6.18-4-itanium-di Provides: md-modules Description: RAID and LVM support This package contains RAID and LVM modules for the Linux kernel. Package: mdadm-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 312 Maintainer: Debian mdadm maintainers Version: 2.5.6-9 Depends: libc6.1 (>= 2.3.5-1) Description: tool to