|
|
| Applications |
| Mailing Lists |
| Miscellaneous |
| Operating Systems |
| Programming |
debian-user-digest Digest V2007 #2048
From: <debian-user-digest-request(at)lists.debian.org>
Date: Sat Jul 28 2007 - 10:48:41 EDT
]0;chris@veri:/home/chris[root@veri chris]# dmesg|grep dev Command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet pnp: PnP ACPI: found 13 devices
usbcore: registered new device driver usb PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
device-mapper: multipath: version 1.0.5 loaded SELinux: initialized (dev sda1, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs Adding 2031608k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:2031608k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
Bluetooth: HCI device and connection manager initialized
]0;chris@veri:/home/chris[root@veri chris]# exit ]0;chris@veri:~[chris@veri ~]$ emacs
-nw[K[K[K[1@w[1@h[1@i[1@c[1@h[1@
Received on Sat Jul 28 10:46:34 2007
Date: Sat Jul 28 2007 - 10:48:41 EDT
Content-Type: text/plain
debian-user-digest Digest Volume 2007 : Issue 2048
Today's Topics:
Re: problems installing with 'writem [ michael <cs@networkingnewsletter.or ]
Date: Sat, 28 Jul 2007 15:26:16 +0100
From: michael <cs@networkingnewsletter.org.uk>
To: debian user <debian-user@lists.debian.org>
Subject: Re: problems installing with 'writemaster' CDROM
Message-Id: <1185632776.12663.5.camel@ratty.phy.umist.ac.uk> Content-Type: text/plain Content-Transfer-Encoding: 7bit
On Sat, 2007-07-28 at 14:47 +0100, Wackojacko wrote:
> michael wrote: > > Folks, I've a new machine > > Its likely that the machine has more bearing on this problem than the > CDROM itself. We need more information regarding the Motherboard and in > particular the IDE or SATA chip the drive is connected to.
Okay, there's more info below
> > with a "writemaster" CDROM drive. When trying > > to install Debian 4.0 from iso image burnt to CD, it initially > > recognises the CD and starts the installation but fails at the screen > > where the CD drive is to be recognised (for continuing the > > installation). I've tried various module/device combos but all to no > > avail. I've looked about on Google but not come up with a working > > solution. > > > > Has anybody else successfully uses this CDROM drive to install Debian, > > or have suggestions on how I can determine a working module/device > > combo. Please let me know if you need any further information. > > Have you tried to boot a live CD like Knoppix or Ubuntu? If this boots > OK the output of > > lspci -vv > lsmod > > would help identify the correct modules to load. > >
I've not had the opportunity to boot from a live CD but it came with Fedora installed so here's output of those commands plus stuff about CDROM from the fedora boot/dmesg:
Script started on Sat 28 Jul 2007 04:20:34 PM BST
]0;chris@veri:~[?1034h[chris@veri ~]$ su
Password:
]0;chris@veri:/home/chris[?1034h[root@veri chris]# ls [Kpci
0[K0[K-vv
bash: lspci: command not found
]0;chris@veri:/home/chris[root@veri chris]# /sbub[K[Kin/lspci
-cc[K[Kvv
00:00.0 Host bridge: Intel Corporation 82Q963/Q965 Memory Controller Hub
(rev 02)
Subsystem: Intel Corporation Unknown device 4f43 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-<MAbort+ >SERR- <PERR-
Latency: 0 Capabilities: [e0] Vendor Specific Information
00:02.0 VGA compatible controller: Intel Corporation 82Q963/Q965 Integrated Graphics Controller (rev 02) (prog-if 00 [VGA])
Subsystem: Intel Corporation Unknown device 4f43 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-<MAbort- >SERR- <PERR-
Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at e0200000 (32-bit, non-prefetchable) [size=1M] Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at 2140 [size=8] Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 Capabilities: [d0] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:03.0 Communication controller: Intel Corporation 82Q963/Q965 HECI Controller (rev 02)
Subsystem: Intel Corporation Unknown device 4f43 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-<MAbort- >SERR- <PERR-
Latency: 0 Interrupt: pin A routed to IRQ 11 Region 0: Memory at e0325900 (64-bit, non-prefetchable) [size=16] Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot +,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [8c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000
00:19.0 Ethernet controller: Intel Corporation 82566DM Gigabit Network Connection (rev 02)
Subsystem: Intel Corporation Unknown device 0001 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-<MAbort- >SERR- <PERR-
Latency: 0 Interrupt: pin A routed to IRQ 2298 Region 0: Memory at e0300000 (32-bit, non-prefetchable) [size=128K] Region 1: Memory at e0324000 (32-bit, non-prefetchable) [size=4K] Region 2: I/O ports at 20c0 [size=32] Capabilities: [c8] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot +,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=1 PME- Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+ Address: 00000000fee0200c Data: 41b9
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Contoller #4 (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Unknown device 4f43 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at 20a0 [size=32]
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Unknown device 4f43 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at 2080 [size=32]
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Unknown device 4f43 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0 Interrupt: pin C routed to IRQ 18 Region 0: Memory at e0325400 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot +,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Debug port
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02)
Subsystem: Intel Corporation Unknown device 2008 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-<MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 22 Region 0: Memory at e0320000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot +,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [70] Express Unknown type IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <64ns, L1 <1us Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed unknown, Width x0, ASPM unknown, Port 0 Link: Latency L0s <64ns, L1 <1us Link: ASPM Disabled CommClk- ExtSynch- Link: Speed unknown, Width x0
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- - SERR- FastB2B-
Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: e0400000-e04fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: [40] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s unlimited, L1 unlimited Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 1 Link: Latency L0s <1us, L1 <4us Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x0 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+ Slot: Number 1, PowerLimit 10.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Unknown, PwrInd Unknown, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Address: fee0300c Data: 4169 Capabilities: [90] Subsystem: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot +,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- - SERR- FastB2B-
Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00001000-00001fff Memory behind bridge: e0100000-e01fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: [40] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s unlimited, L1 unlimited Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 2 Link: Latency L0s <256ns, L1 <4us Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch- Link: Speed 2.5Gb/s, Width x1 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+ Slot: Number 2, PowerLimit 10.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Unknown, PwrInd Unknown, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Address: fee0300c Data: 4171 Capabilities: [90] Subsystem: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot +,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- - SERR- FastB2B-
Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Memory behind bridge: e0500000-e05fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: [40] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s unlimited, L1 unlimited Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 3 Link: Latency L0s <1us, L1 <4us Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x0 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+ Slot: Number 3, PowerLimit 10.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Unknown, PwrInd Unknown, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Address: fee0300c Data: 4179 Capabilities: [90] Subsystem: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot +,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- - SERR- FastB2B-
Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
0, Cache Line Size: 64 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 Memory behind bridge: e0600000-e06fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: [40] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s unlimited, L1 unlimited Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 4 Link: Latency L0s <1us, L1 <4us Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x0 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+ Slot: Number 4, PowerLimit 10.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Unknown, PwrInd Unknown, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Address: fee0300c Data: 4181 Capabilities: [90] Subsystem: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot +,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- - SERR- FastB2B-
Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
0, Cache Line Size: 64 bytes Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 Memory behind bridge: e0700000-e07fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: [40] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s unlimited, L1 unlimited Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 5 Link: Latency L0s <1us, L1 <4us Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x0 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+ Slot: Number 5, PowerLimit 10.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Unknown, PwrInd Unknown, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Address: fee0300c Data: 4189 Capabilities: [90] Subsystem: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot +,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Unknown device 4f43 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at 2060 [size=32]
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Unknown device 4f43 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at 2040 [size=32]
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Unknown device 4f43 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at 2020 [size=32]
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Unknown device 4f43 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at e0325000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot +,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Debug port
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev f2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- - SERR- FastB2B-
Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
0 Bus: primary=00, secondary=06, subordinate=06, sec-latency=32 Memory behind bridge: e0000000-e00fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: [50] Subsystem: Intel Corporation Unknown device 4f43
00:1f.0 ISA bridge: Intel Corporation 82801HO (ICH8DO) LPC Interface Controller (rev 02)
Subsystem: Intel Corporation Unknown device 4f43 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0 Capabilities: [e0] Vendor Specific Information
00:1f.2 IDE interface: Intel Corporation 82801H (ICH8 Family) 4 port SATA IDE Controller (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Intel Corporation Unknown device 4f43 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0 Interrupt: pin A routed to IRQ 19 Region 0: I/O ports at 2138 [size=8] Region 1: I/O ports at 2154 [size=4] Region 2: I/O ports at 2130 [size=8] Region 3: I/O ports at 2150 [size=4] Region 4: I/O ports at 2110 [size=16] Region 5: I/O ports at 2100 [size=16] Capabilities: [70] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot +,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02)
Subsystem: Intel Corporation Unknown device 4f43 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 21 Region 0: Memory at e0325800 (32-bit, non-prefetchable) [size=256] Region 4: I/O ports at 2000 [size=32]
00:1f.5 IDE interface: Intel Corporation 82801H (ICH8 Family) 2 port SATA IDE Controller (rev 02) (prog-if 85 [Master SecO PriO])
Subsystem: Intel Corporation Unknown device 4f43 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0 Interrupt: pin A routed to IRQ 19 Region 0: I/O ports at 2128 [size=8] Region 1: I/O ports at 214c [size=4] Region 2: I/O ports at 2120 [size=8] Region 3: I/O ports at 2148 [size=4] Region 4: I/O ports at 20f0 [size=16] Region 5: I/O ports at 20e0 [size=16] Capabilities: [70] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot +,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:00.0 IDE interface: Marvell Technology Group Ltd. 88SE6101 single-port PATA133 interface (rev b1) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Marvell Technology Group Ltd. 88SE6101 single-port PATA133 interface
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- - SERR- FastB2B-
Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: I/O ports at 1018 [size=8] Region 1: I/O ports at 1024 [size=4] Region 2: I/O ports at 1010 [size=8] Region 3: I/O ports at 1020 [size=4] Region 4: I/O ports at 1000 [size=16] Region 5: Memory at e0100000 (32-bit, non-prefetchable) [size=512] Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0+,D1+,D2-,D3hot +,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=1 PME- Capabilities: [50] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 Capabilities: [e0] Express Legacy Endpoint IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s unlimited, L1 unlimited Device: AtnBtn- AtnInd- PwrInd- Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr+ NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 512 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s, Port 0 Link: Latency L0s <256ns, L1 unlimited Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch- Link: Speed 2.5Gb/s, Width x1
06:03.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10 [OHCI])
Subsystem: Intel Corporation Unknown device 4f43 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 1000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at e0004000 (32-bit, non-prefetchable) [size=2K] Region 1: Memory at e0000000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot +,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME+
]0;chris@veri:/home/chris[root@veri chris]# lsmod
bash: lsmod: command not found
]0;chris@veri:/home/chris[root@veri chris]# /sbin/lsmod
Module Size Used by i915 35521 2 drm 105321 3 i915 autofs4 32841 2 hidp 38209 2 rfcomm 57833 0 l2cap 41025 10 hidp,rfcomm bluetooth 73541 5 hidp,rfcomm,l2cap sunrpc 191305 1 nf_conntrack_netbios_ns 11713 0 nf_conntrack_ipv4 20817 2 xt_state 11201 2 nf_conntrack 77213 3 nf_conntrack_netbios_ns,nf_conntrack_ipv4,xt_state nfnetlink 15113 2 nf_conntrack_ipv4,nf_conntrack ipt_REJECT 13505 2 iptable_filter 11713 1 ip_tables 29097 1 iptable_filter xt_tcpudp 12097 10 ip6t_REJECT 14529 2 ip6table_filter 11585 1 ip6_tables 23305 1 ip6table_filter x_tables 29000 6 xt_state,ipt_REJECT,ip_tables,xt_tcpudp,ip6t_REJECT,ip6_tables cpufreq_ondemand 17489 2 acpi_cpufreq 19785 0 dm_multipath 28241 0 video 28113 0 sbs 28753 0 button 17633 0 dock 19753 0 battery 19657 0 ac 14537 0 ipv6 341673 29 ip6t_REJECT lp 22801 0 loop 27973 0 snd_hda_intel 316385 1 snd_seq_dummy 12613 0 snd_seq_oss 40897 0 snd_seq_midi_event 16576 1 snd_seq_oss snd_seq 63201 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event snd_seq_device 17109 3 snd_seq_dummy,snd_seq_oss,snd_seq snd_pcm_oss 52673 0 snd_mixer_oss 25537 1 snd_pcm_oss serio_raw 16069 0 i2c_i801 17757 0 snd_pcm 93257 2 snd_hda_intel,snd_pcm_oss parport_pc 39273 1 shpchp 42845 0 parport 48973 2 lp,parport_pc firewire_ohci 26817 0 snd_timer 32585 2 snd_seq,snd_pcm firewire_core 53889 1 firewire_ohci crc_itu_t 10817 1 firewire_core snd 71785 10 snd_hda_intel,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer soundcore 17249 1 snd e1000 133121 0 floppy 71849 0 iTCO_wdt 20625 0 iTCO_vendor_support 12741 1 iTCO_wdt snd_page_alloc 19025 2 snd_hda_intel,snd_pcm i2c_core 35777 1 i2c_i801 rtc_cmos 17017 0 sr_mod 26853 0 cdrom 44009 1 sr_mod sg 45673 0 dm_snapshot 25609 0 dm_zero 10817 0 dm_mirror 30785 0 dm_mod 68785 9 dm_multipath,dm_snapshot,dm_zero,dm_mirror pata_marvell 16449 0 ata_piix 25413 3 ata_generic 17221 0 libata 137201 3 pata_marvell,ata_piix,ata_generic sd_mod 37441 5 scsi_mod 168697 4 sr_mod,sg,libata,sd_mod ext3 141905 2 jbd 73009 1 ext3 mbcache 18249 1 ext3 ehci_hcd 42957 0 ohci_hcd 30405 0 uhci_hcd 34401 0
]0;chris@veri:/home/chris[root@veri chris]# dmesg|grep dev Command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet pnp: PnP ACPI: found 13 devices
usbcore: registered new device driver usb PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Setting latency timer of device 0000:00:1c.0 to 64 PCI: Setting latency timer of device 0000:00:1c.1 to 64 PCI: Setting latency timer of device 0000:00:1c.2 to 64 PCI: Setting latency timer of device 0000:00:1c.3 to 64 PCI: Setting latency timer of device 0000:00:1c.4 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64Boot video device is 0000:00:02.0
PCI: Setting latency timer of device 0000:00:1c.0 to 64 PCI: Setting latency timer of device 0000:00:1c.1 to 64 PCI: Setting latency timer of device 0000:00:1c.2 to 64 PCI: Setting latency timer of device 0000:00:1c.3 to 64 PCI: Setting latency timer of device 0000:00:1c.4 to 64mice: PS/2 mouse device common for all mice usbcore: registered new interface driver hiddev drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
PCI: Setting latency timer of device 0000:00:1a.0 to 64 PCI: Setting latency timer of device 0000:00:1a.1 to 64 PCI: Setting latency timer of device 0000:00:1d.0 to 64 PCI: Setting latency timer of device 0000:00:1d.1 to 64 PCI: Setting latency timer of device 0000:00:1d.2 to 64 PCI: Setting latency timer of device 0000:00:1a.7 to 64 PCI: cache line size of 32 is not supported by device 0000:00:1a.7usb 4-2: new low speed USB device using uhci_hcd and address 2
PCI: Setting latency timer of device 0000:00:1d.7 to 64 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 PCI: Setting latency timer of device 0000:00:1f.2 to 64usb 4-2: new low speed USB device using uhci_hcd and address 3 PCI: Setting latency timer of device 0000:00:1f.5 to 64 PCI: Setting latency timer of device 0000:02:00.0 to 64 device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
SELinux: initialized (dev dm-0, type ext3), uses xattr SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), usesgenfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts SELinux: initialized (dev anon_inodefs, type anon_inodefs), notconfigured for labeling
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contextsiTCO_wdt: Found a ICH8DO TCO device (Version=2, TCOBASE=0x0460) PCI: Setting latency timer of device 0000:00:19.0 to 64 firewire_ohci: Added fw-ohci device 0000:06:03.0, OHCI version 1.10 PCI: Setting latency timer of device 0000:00:1b.0 to 64 firewire_core: created new fw device fw0 (0 config rom retries) SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts No dock devices found.
device-mapper: multipath: version 1.0.5 loaded SELinux: initialized (dev sda1, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs Adding 2031608k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:2031608k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
Bluetooth: HCI device and connection manager initialized
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
]0;chris@veri:/home/chris[root@veri chris]# mount
/dev/mapper/VolGroup00-LogVol00 on / type ext3 (rw)
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
devpts on /dev/pts type devpts (rw,gid=5,mode=620)
/dev/sda1 on /boot type ext3 (rw) tmpfs on /dev/shm type tmpfs (rw) none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw)sunrpc on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw) /dev/scd0 on /media/Debian 4.0 r0 i386 Bin-1 type iso9660 (ro,nosuid,nodev,uhelper=hal,uid=500)
]0;chris@veri:/home/chris[root@veri chris]# exit ]0;chris@veri:~[chris@veri ~]$ emacs
-nw[K[K[K[1@w[1@h[1@i[1@c[1@h[1@
Script done on Sat 28 Jul 2007 04:24:12 PM BST
Michael
End of debian-user-digest Digest V2007 Issue #2048
Received on Sat Jul 28 10:46:34 2007
This archive was generated by hypermail 2.1.8 : Thu Aug 09 2007 - 19:05:33 EDT
|
Contact Us Legal Notices Order Services Online Pantek Home Privacy Policy IT news Site Map Pantek Library |