|
|||||||||||
|
Built LSI SAS RAID driver: unknown symbol error at load
From: John Craig <jc-mailinglist(at)alphagconsulting.com>
Date: Tue Apr 29 2008 - 20:50:48 EDT
I'm attempting to get the RAID controller (and the SAS drives hooked to it that I paid so much money for [sigh]) visible to Debian.
The kernel version is:
Running on a Supermicro *H8DM3-2 motherboard (with on-board *LSI SAS1068E Controller)
lspci reports the controller as:
LSI provides a source tar ball (good for them!) and although the driver source apparently compiled successfully, it would not load.
/var/log/kern.log says:
mptctl: Registered with Fusion MPT base driver mptctl: /dev/mptctl @ (major,minor=10,220) mptsas: Unknown symbol scsi_is_sas_phy_local mptctl: Deregistered /dev/mptctl @ (major,minor=10,220) Any suggestions most appreciated.
(A side note: The mptsas driver supplied with the etch release loads
fine, but, apparently doesn't support the controller:
modinfo mptsas
Thanks! John -- To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.orgReceived on Tue Apr 29 21:03:38 2008 This archive was generated by hypermail 2.1.8 : Sun Jul 20 2008 - 07:26:40 EDT |
||||||||||
|
|||||||||||