(no subject)

Dear Sir,

   I 've downloaded the example realizaton of ISAKMP:pluto package(0.7) and compiled it using -DJI option .According to the README,I set up the following test environment:

192.168.1.100<--->
FW1(192.168.1.115,192.168.2.1)  <----------->
FW2(192.168.2.2,192.168.3.116)

  I've tested IPSEC0.7,and it was OK. After running pluto on FW2, I run whack as follows:
 FW1#whack 7501 192.168.2.2 7500 192.168.1.0 255.255.255.0 192.168.3.0 255.255.255.0 encrypt

 I got messages like "Goal=1,done". My queston is: (1) Where are the resultant SAs placed;
(2) How can I use the negotiated SAs to configure IPSEC(If there are SAs ,I can configure it ).

  I'm eagerly waiting for your reply.Thank you for your help!

  Yours sincerely,

    May 13 ,1998