[Users] Problems with WLAN

I use Freeswan 2.02 with X509 Patch and Kernel 2.4.22 and want to connect to the internet from a WLAN Windows XP Client.

  Linuxgateway                          Windows XP Client
192.168.1.80|-------------------------|192.168.1.127

The communication between linuxgateway and Windows XP Client over wireless LAN is
successful. But when I set the rightsubnet to 0.0.0.0/0 to reach the internet I get the message "could not start conn armin". Furthermore, after executing ipsec on my XP Client,
the connection parameter for CA (ID) is C=DE, .., CN=gateway but as far I think it should be
"C=DE, .., CN=wg" (see config below: rightca= ...)

Should the CA (ID) on the XP-Client not always be the string I assigned to rightca?

XP Client:

	rightca="C=DE, ST=wg, L=wg, O=wg, OU=wg, CN=wg"
	leftid="C=DE, ST=wg, O=wg, OU=wg, CN=Armin"
	rightid="C=DE, ST=wg, O=wg, OU=wg, CN=gateway"
	right=192.168.1.80
	rightsubnet=0.0.0.0/0
	left=192.168.1.127
	network=lan
	auto=start

Linuxgateway:
============= conn armin

	#interfaces="ipsec0=eth2"
	leftid="C=DE, ST=wg, O=wg, OU=wg, CN=gateway"
	rightid="C=DE, ST=wg, O=wg, OU=wg, CN=Armin" 
	leftcert=/etc/ipsec.d/gatewayCert.pem
	rightcert=/etc/ipsec.d/arminCert.pem
	leftca="C=DE, ST=wg, L=wg, O=wg, OU=wg, CN=wg"
	right=192.168.1.127
	left=192.168.1.80
	leftsubnet=0.0.0.0/0

I have already established a local ipsec tunnel with connection to the internet available, but switching to WLAN should always work. What's wrong?

Armin

-- 
Using M2, Opera's revolutionary e-mail client: 
http://www.opera.com/m2/
_______________________________________________
FreeS/WAN Users mailing list
users@lists.freeswan.org
https://mj2.freeswan.org/cgi-bin/mj_wwwusr