Re: Alphastation 500 panic (with trace and ps) on 3.2-current

From: alex avriette <avriettea(at)speakeasy.net>
Date: Tue Dec 10 2002 - 18:39:49 EST

> Well, we wanted to get feedback from Alphastation 500 users, it seems

Ok, kickass. I submitted a bug some time back regarding it not booting with my 2.8 or 3.0 cd's.

> I guess you booted diskless. If you could hook a serial console, so as

Yeah, diskless. This machine is just another nameless rearend in a rack. No monitor/kb/etc. I had thought about supplying dmesg, but it seemed a little large.

> Also, could you provide the panic message? Right now the information

Sure thing.

> [follow-up to bugs@ only]

Um, I am not subscribed to bugs@ (although I send in enough, I probably should be). Could you keep a CC to myself?

5220120+385816 [85+312672+180327]

Entering bsd at 0xfffffc0000230000...
[ using 493984 bytes of bsd ELF symbol table ] consinit: not using prom console
Copyright (c) 1982, 1986, 1989, 1991, 1993

         The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2002 OpenBSD. All rights reserved. http://www.OpenBSD.org

OpenBSD 3.2-current (GENERIC) #6: Mon Dec 9 07:25:01 MST 2002

     root@alpha.sightly.net:/a/src/sys/arch/alpha/compile/GENERIC Digital AlphaStation 500/266, 266MHz
8192 byte page size, 1 processor.
total memory = 536870912 (524288K)
(2310144 reserved for PROM, 534560768 used by OpenBSD) avail memory = 462725120 (451880K)
using 6525 buffers containing 53452800 bytes (52200K) of memory mainbus0 (root)
cpu0 at mainbus0: ID 0 (primary), 21164-0 (unknown minor type 0) cia0 at mainbus0: DECchip 2117x Core Logic Chipset (ALCOR/ALCOR2), pass 2
pci0 at cia0 bus 0

de0 at pci0 dev 6 function 0 "DEC 21040" rev 0x24: kn20aa irq 13
de0: DEC 21040 [10Mb/s] pass 2.4 address 00:00:f8:23:b3:fe
tga0 at pci0 dev 8 function 0 "DEC TGA2" rev 0x22: TGA2 pass 2, board 

type T8-02
tga0: 1280 x 1024, 8bpp, Bt485 RAMDAC
tga0: interrupting at kn20aa irq 16
wsdisplay0 at tga0
wsdisplay0: screen 0 added (std, vt100 emulation) isp0 at pci0 dev 9 function 0 "QLogic ISP1020" rev 0x02: kn20aa irq 12 scsibus0 at isp0: 16 targets
sd0 at scsibus0 targ 0 lun 0: <SEAGATE, ST32550W, 0021> SCSI2 0/direct fixed
sd0: 2047MB, 3511 cyl, 11 head, 108 sec, 512 bytes/sec, 4194058 sec total
sd1 at scsibus0 targ 1 lun 0: <QUANTUM, VIKING II 9.1WSE, 3506> SCSI2 0/direct fixed
sd1: 8709MB, 8338 cyl, 10 head, 213 sec, 512 bytes/sec, 17836668 sec total
cd0 at scsibus0 targ 4 lun 0: <DEC, RRD45 (C) DEC, 0436> SCSI2 5/cdrom removable
pceb0 at pci0 dev 10 function 0 "Intel 82375EB PCI-EISA" rev 0x05 eisa0 at pceb0
isa0 at pceb0
vga0 at isa0 port 0x3b0/48 iomem 0xa0000/131072 wsdisplay1 at vga0
wsdisplay1: screen 0-5 added (80x25, vt100 emulation) isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
midi0 at pcppi0: <PC speaker>
isabeep0 at pcppi0
lpt0 at isa0 port 0x3bc/4 irq 7
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec mcclock0 at isa0 port 0x70/2: mc146818 or compatible stray isa irq 3
nfs_boot: using network interface 'de0'
panic: revarp failed, error=51
Stopped at Debugger+0x4: ret zero,(ra) RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS PANIC!
DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION! ddb> ps

    PID   PPID   PGRP    UID  S       FLAGS  WAIT       COMMAND
*    0     -1      0      0  2     0x80204             swapper

ddb> trace
Debugger(0, 1, 5, 8, 3, 8) at Debugger+0x4 panic(fffffc000066c457, 33, fffffc0000664217, 200, 0, fffffc000014d9e8) at pani
c+0x128
nfs_boot_init(fffffc000014dca8, ?, ?, ?, 0, fffffc000014d9e8) at nfs_boot_init+
0x21c

nfs_mountroot(?, ?, ?, ?, 0, fffffc000014d9e8) at nfs_mountroot+0x70
vfs_mountroot(?, ?, ?, ?, 0, fffffc000014d9e8) at vfs_mountroot+0x24
main(?, ?, ?, ?, 0, fffffc000014d9e8) at main+0x5ec
Lstart1(?, ?, ?, ?, 0, fffffc000014d9e8) at Lstart1+0x60
Lstart1(?, ?, ?, ?, 0, fffffc000014d9e8) at Lstart1+0x60
Lstart1(?, ?, ?, ?, 0, fffffc000014d9e8) at Lstart1+0x60
Lstart1(?, ?, ?, ?, 0, fffffc000014d9e8) at Lstart1+0x60
Lstart1(?, ?, ?, ?, 0, fffffc000014d9e8) at Lstart1+0x60
Lstart1(?, ?, ?, ?, 0, fffffc000014d9e8) at Lstart1+0x60
Lstart1(?, ?, ?, ?, 0, fffffc000014d9e8) at Lstart1+0x60
Lstart1(?, ?, ?, ?, 0, fffffc000014d9e8) at Lstart1+0x60
Lstart1(?, ?, ?, ?, 0, fffffc000014d9e8) at Lstart1+0x60
Lstart1(?, ?, ?, ?, 0, fffffc000014d9e8) at Lstart1+0x60
Lstart1(?, ?, ?, ?, 0, fffffc000014d9e8) at Lstart1+0x60
Lstart1(?, ?, ?, ?, 0, fffffc000014d9e8) at Lstart1+0x60
Lstart1(?, ?, ?, ?, 0, fffffc000014d9e8) at Lstart1+0x60
Lstart1(?, ?, ?, ?, 0, fffffc000014d9e8) at Lstart1+0x60

ddb>

I grabbed a new kernel from the snapshots directory today, the above was the output from it. I don't have another alpha with which to compile stuff. Sorry.

Thanks,
alex Received on Tue Dec 10 18:40:50 2002