3.3 problem with apm on compaq armada 1750

From: Dam, Richard van <rvdam(at)flamco.nl>
Date: Fri May 23 2003 - 05:48:20 EDT

After installing openbsd 3.3 I started the apm daemon (apmd). When I use the command apm -S command the system is goining standby. When I turned on the laptop I got the following message:

uvm_fault(0xd0535880, 0x0, 0, 1) -> e
kernel: page fault trap, code=0
stopped atr _epinit+0x458: pushl 0xc(%eax) ddb>

I have included my dmesg text below:

===
OpenBSD 3.3 (GENERIC) #44: Sat Mar 29 13:22:05 MST 2003

    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel Celeron (Mendocino) ("GenuineIntel" 686-class, 256KB L2 cache) 299 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR real mem = 100216832 (97868K)
avail mem = 87228416 (85184K)
using 1248 buffers containing 5111808 bytes (4992K) of memory mainbus0 (root)
bios0 at mainbus0: AT/286+(ff) BIOS, date 11/30/99, BIOS32 rev. 0 @ 0xf0000 apm0 at bios0: Power Management spec V1.2 (BIOS managing devices) apm0: battery life expectancy 100%
apm0: AC on, battery charge high
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0x1080

pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xf09a0/96 (4 entries)
pcibios0: bad IRQ table checksum
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xf6cc0/96 (4 entries)
pcibios0: PCI Exclusive IRQs: 11
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371AB PIIX4 ISA" rev

0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0x10000
pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "Intel 82443BX PCI-AGP" rev 0x03 ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03 pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Mach64 LB" rev 0xdc wsdisplay0 at vga1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02 pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility wd0 at pciide0 channel 0 drive 0: <IBM-DBCA-204860> wd0: 16-sector PIO, LBA, 4108MB, 8905 cyl, 15 head, 63 sec, 8415225 sectors atapiscsi0 at pciide0 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, CD-ROM XM-1802B, 1222> SCSI0 5/cdrom removable
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 cd0(pciide0:0:1): using PIO mode 4, DMA mode 2 pciide0: channel 1 ignored (disabled)
uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 11 usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x0000 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered "Intel 82371AB Power Mgmt" rev 0x02 at pci0 dev 7 function 3 not configured fxp0 at pci0 dev 15 function 0 "Intel 82557" rev 0x05: irq 11, address 00:50:8b:54:1a:f0
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 0 cbb0 at pci0 dev 17 function 0 "Texas Instruments PCI1225 PCI-CardBus" rev 0x01: irq 11
cbb1 at pci0 dev 17 function 1 "Texas Instruments PCI1225 PCI-CardBus" rev 0x01: irq 11
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0 pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
sb0 at isa0 port 0x220/24 irq 5 drq 1: dsp v3.01 midi0 at sb0: <SB MIDI UART>
audio0 at sb0
opl0 at sb0: model OPL3
midi1 at opl0: <SB Yamaha OPL3>
pcppi0 at isa0 port 0x61
midi2 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pccom2: irq 5 already in use
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x8, lattimer 0x20 pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 3 device 0 cacheline 0x8, lattimer 0x20 pcmcia1 at cardslot1
biomask 4840 netmask 4840 ttymask 58c2
pctr: 686-class user-level performance counters enabled mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
ep1 at pcmcia1 function 0 "3Com Corporation, 3C562D/3C563D, EtherLink III": can't allocate i/o space
pccom3 at pcmcia1 function 1 "3Com Corporation, 3C562D/3C563D, EtherLink III" port 0xa2f8/8: ns16550a, 16 byte fifo

Free Tip: The F1 Key does NOT destroy your PC! Received on Fri May 23 05:53:07 2003