Problem booting openbsd 3.3 on the sunfire v120

From: Ricardo Nascimento Ferreira <Ricardo.Ferreira(at)planalto.gov.br>
Date: Mon May 26 2003 - 18:26:27 EDT

 I´ve been experiencing problems with booting and installoing openbsd 3.3 in a sunfire v120. The OpenBootProm was updated to 4.0.15 2003/04/30 and the output of the booting process is below:

OpenBSD 3.3 (RAMDISK) #34: Sat Mar 29 13:22:22 MST 2003

    deraadt@sparc64.openbsd.org:/usr/src/sys/arch/sparc64/compile/RAMDISK total memory = 536870912
avail memory = 490487808
using 3276 buffers containing 26836992 bytes of memory bootpath: /pci@1f,0/pci@1,1/ide@d,0/cdrom@0,0:f mainbus0 (root): Sun Fire V120 (UltraSPARC-IIe 648MHz) cpu0 at mainbus0: SUNW,UltraSPARC-IIe @ 648 MHz, version 0 FPU cpu0: physical 32K instruction (32 b/l), 16K data (32 b/l), 2048K external (64 b/l) psycho0 at mainbus0
SUNW,sabre: impl 0, version 0: ign 7c0 bus range 0 to 2; PCI bus 0 DVMA map: c0000000 to e0000000
IOTDB: 1eaa000 to 1f2a000
pci0 at psycho0
ppb0 at pci0 dev 1 function 1 vendor 0x108e product 0x5000 rev 0x13 pci1 at ppb0 bus 1 ebus0 at pci1 dev 12 function 0 vendor 0x108e product 0x1100 rev 0x01 flashprom at ebus0 addr 0-fffff not configured clock0 at ebus0 addr 0-1fff: mk48t59: hostid 83278745
ebus_attach: idprom: incomplete
SUNW,lomh at ebus0 addr 200000-200003 ipl 42 not configured gem0 at pci1 dev 12 function 1 vendor 0x108e product 0x1101 rev 0x01 gem0: address 00:03:ba:27:87:45
ukphy0 at gem0 phy 1: Generic IEEE 802.3u media interface ukphy0: OUI 0x0010dd, model 0x0002, rev. 1 gem0: using ivec 3006 for interrupt
vendor 0x108e product 0x1103 (class serial bus, subclass USB, rev 0x01) at pci1 dev 12 function 3 not configured vendor 0x10b9 product 0x7101 (class prehistoric, subclass miscellaneous, rev 0x00) at pci1 dev 3 function 0 not configured vendor 0x10b9 product 0x7101 (class prehistoric, subclass miscellaneous, rev 0x00) at pci1 dev 3 function 0 not configured ebus1 at pci1 dev 7 function 0 vendor 0x10b9 product 0x1533 rev 0x00 power at ebus1 addr 800-82f ipl 37 not configured serial at ebus1 addr 3f8-3ff ipl 43 not configured serial at ebus1 addr 2e8-2ef ipl 43 not configured pciide0 at pci1 dev 13 function 0 vendor 0x10b9 product 0x5229 rev 0xc3: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide0: using ivec 180c for native-PCI interrupt atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, DV-28E-B, 1.2B> SCSI0 5/cdrom removable cd0(pciide0:0:0): using PIO mode 4
pciide0: channel 1 disabled (no drives)
gem1 at pci1 dev 5 function 1 vendor 0x108e product 0x1101 rev 0x01 gem1: address 00:03:ba:27:87:46
ukphy1 at gem1 phy 1: Generic IEEE 802.3u media interface ukphy1: OUI 0x0010dd, model 0x0002, rev. 1 gem1: using ivec 301c for interrupt
vendor 0x108e product 0x1103 (class serial bus, subclass USB, rev 0x01) at pci1 dev 5 function 3 not configured ppb1 at pci0 dev 1 function 0 vendor 0x108e product 0x5000 rev 0x13 pci2 at ppb1 bus 2 siop0 at pci2 dev 8 function 0 vendor 0x1000 product 0x000b rev 0x07 using on-board RAM ivec 20 scsibus1 at siop0: 16 targets
siop0: target 0 now using tagged 16 bit 40.0 MHz 31 REQ/ACK offset xfers sd0 at scsibus1 targ 0 lun 0: <SEAGATE, ST336605LSUN36G, 0638> SCSI3 0/direct fixed
sd0: 34732MB, 24622 cyl, 27 head, 107 sec, 512 bytes/sec, 71132959 sec total siop0: target 1 now using tagged 16 bit 40.0 MHz 31 REQ/ACK offset xfers sd1 at scsibus1 targ 1 lun 0: <SEAGATE, ST336605LSUN36G, 0638> SCSI3 0/direct fixed
sd1: 34732MB, 24622 cyl, 27 head, 107 sec, 512 bytes/sec, 71132959 sec total siop1 at pci2 dev 8 function 1 vendor 0x1000 product 0x000b rev 0x07 using on-board RAM ivec 20 scsibus2 at siop1: 16 targets pcons0 at mainbus0 data fault: pc=1008e30 addr=0
panic: kernel fault
halted

000000000000001500000000f000000000000000000000000000000000000000ffffffffbdfb
fe78000000000000000f00000000000000000000000000000000000000000000001300050010

00000000f000420000000000f00042040004001000000000f000420000000000f00042040003 001000000000f0006fe000000000f0006fe40002017f00000000f0056f5c00000000f0056f60 0001004e00000000010090c400000000010090c8 Watchdog Reset
Externally Initiated Reset
ok

   Ricardo Received on Mon May 26 18:35:38 2003