usb2 problem, GENERIC not booting

From: Alex Bihlmaier <alex(at)kallisti.de>
Date: Wed May 28 2003 - 02:35:58 EDT

Hello folks.

I am running OpenBSD 3.3-RELEASE on some MAXDATA 19inch-Hardware. The computer is fairly new and the installation on wd0 hangs on booting the GENERIC kernel after the installation.

The installation process succeeds, no problem with that. After that:
Rebooting,
Boot Loader loads hd0a:/bsd (look at the attached output) initializes all the stuff and then freezes, related to the usb stuff.

It is related to the USB stuff because, after disabling USB Support in the AWARD Bios everything works fine. No Problems, Core Dumps and stuff.

For further Information: look at the attached dmesg output. The relevant usb-problem line:
uhci at pci0 dev 31 function 4 "Intel 82801BA USB2" rev 0x05

Is this a known bug (i can't find it)?

I can use one of the server for further hacking/debugging.

The USB Support on the other computers is disabled, they are production machines.

Thank you for your patience.
Alex Bihlmaier
OpenBSD 3.3 (GENERIC) #44: Sat Mar 29 13:22:05 MST 2003 deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel Pentium 4 ("GenuineIntel" 686-class) 1.62 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SIMD real mem = 536444928 (523872K)
avail mem = 491806720 (480280K)
using 4278 buffers containing 26927104 bytes (26296K) of memory mainbus0 (root)
bios0 at mainbus0: AT/286+(82) BIOS, date 01/15/02, BIOS32 rev. 0 @ 0xf0ff0 apm0 at bios0: Power Management spec V1.2 apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0x1812

pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xf1760/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB PCI-ISA" rev 0x00)
pcibios0: PCI bus #2 is the last bus

bios0: ROM list: 0xc0000/0xc000 0xcc000/0x800 0xd0000/0x800 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "Intel 82845 Host" rev 0x04 ppb0 at pci0 dev 1 function 0 "Intel 82845 AGP" rev 0x04 pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Rage Fury" rev 0x00 wsdisplay0 at vga1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) ppb1 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x05 pci2 at ppb1 bus 2
xl0 at pci2 dev 10 function 0 "3Com 3c905C 100Base-TX" rev 0x78: irq 12xl0: command never completed! xl0: command never completed!
xl0: command never completed!
address 00:04:75:8d:b3:c5
exphy0 at xl0 phy 24: 3Com internal media interface

xl0: command never completed!
xl0: command never completed!
xl0: command never completed!

xl1 at pci2 dev 11 function 0 "3Com 3c905C 100Base-TX" rev 0x78: irq 5xl1: command never completed! xl1: command never completed!
xl1: command never completed!
address 00:04:75:8d:b2:8f
exphy1 at xl1 phy 24: 3Com internal media interface

xl1: command never completed!
xl1: command never completed!
xl1: command never completed!

pcib0 at pci0 dev 31 function 0 "Intel 82801BA LPC" rev 0x05 pciide0 at pci0 dev 31 function 1 "Intel 82801BA IDE" rev 0x05: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility wd0 at pciide0 channel 0 drive 0: <WDC WD200BB-32CFC0> wd0: 16-sector PIO, LBA, 19092MB, 16383 cyl, 16 head, 63 sec, 39102336 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 pciide0: channel 1 disabled (no drives)
=== here comes the usb stuff ===

• usb hub, usb ports and stuff like that ===
• the usb controller is working on interrupt 12 === auich0 at pci0 dev 31 function 5 "Intel 82801BA AC97 Audio" rev 0x05: irq 10, ICH2 AC97 ac97: codec id 0x414c4710 (Avance Logic ALC200) ac97: codec features headphone, 18 bit DAC, 18 bit ADC, Realtek 3D audio0 at auich0 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> sysbeep0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 npx0 at isa0 port 0xf0/16: using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec biomask 4040 netmask 5060 ttymask 50e2 pctr: user-level cycle counter enabled dkcsum: wd0 matched BIOS disk 80 root on wd0a rootdev=0x0 rrootdev=0x300 rawdev=0x302

Received on Wed May 28 02:42:11 2003