sparc64/3281: device timeout for fxp0 (82557) on netra t1 105

From: The Fungi <fungi(at)yuggoth.org>
Date: Sat May 31 2003 - 14:07:14 EDT

>Number: 3281
>Category: sparc64
>Synopsis: device timeout for fxp0 (82557) on netra t1 105
>Confidential: yes

	System      : OpenBSD 3.3
	Architecture: OpenBSD.sparc64
	Machine     : Sun Netra t1 105

>Description:

	Kernel repeatedly reports a device timeout for fxp0, an
	Intel-branded i82557 in the one available PCI slot on a
	Netra t1 105 riser. The slot is supported as OpenBSD 3.3
	is able to make use of a quad-hme card in the same unit.
	The i82557 card is supported by the Netra since it works
	properly in the same chassis running Debian. The card is
	supported properly in OpenBSD i386 on a variety of our
	firewalls. I see the hardware support list suggests that
	the i82556 is unsupported, but makes no mention of this
	chip. I have tried recompiling from CURRENT on 20030530
	but see the same issue. Nothing that sounds like a fix
	is mentioned in the CURRENT changelog either and I see
	no other bugs reported for this.

Copyright (c) 1982, 1986, 1989, 1991, 1993
	The Regents of the University of California.  All rights reserved.

Copyright (c) 1995-2003 OpenBSD. All rights reserved. http://www.OpenBSD.org

OpenBSD 3.3-current (GENERIC) #0: Fri May 30 21:03:32 GMT 2003

    root@foo:/usr/src/sys/arch/sparc64/compile/GENERIC total memory = 268435456
avail memory = 239648768
using 1638 buffers containing 13418496 bytes of memory bootpath: /pci@1f,0/pci@1,1/scsi@2,0/disk@0,0 mainbus0 (root): Netra t1 (UltraSPARC-IIi 440MHz) cpu0 at mainbus0: SUNW,UltraSPARC-IIi @ 440.027 MHz, version 0 FPU cpu0: physical 32K instruction (32 b/l), 16K data (32 b/l), 2048K external (64 b/l) psycho0 at mainbus0 addr 0xfffc0000
SUNW,sabre: impl 0, version 0: ign 7c0 bus range 0 to 3; PCI bus 0 DVMA map: c0000000 to e0000000
IOTDB: f68000 to fe8000
pci0 at psycho0
ppb0 at pci0 dev 1 function 1 "Sun Simba PCI-PCI" rev 0x13 pci1 at ppb0 bus 1
ebus0 at pci1 dev 1 function 0 "Sun PCIO Ebus2" rev 0x01 auxio0 at ebus0 addr 726000-726003, 728000-728003, 72a000-72a003, 72c000-72c003, 72f000-72f003 power at ebus0 addr 724000-724003 ipl 37 not configured SUNW,pll at ebus0 addr 504000-504002 not configured com0 at ebus0 addr 3803f8-3803ff ipl 28: ns16550a, 16 byte fifo com0: console
com1 at ebus0 addr 3602f8-3602ff ipl 20: ns16550a, 16 byte fifo lpt0 at ebus0 addr 340278-340287, 30015c-30015d, 700000-70000f ipl 34: polled fdthree at ebus0 addr 3203f0-3203f7, 706000-70600f, 720000-720003 ipl 39 not configured clock0 at ebus0 addr 0-1fff: mk48t59: hostid 80c1b7d0 flashprom at ebus0 addr 0-fffff not configured watchdog at ebus0 addr 200000-20003f ipl 4 not configured display7seg at ebus0 addr 200040-200040 not configured beeper0 at ebus0 addr 722000-722003: can't map register space flashprom at ebus0 addr 400000-5fffff not configured flashprom at ebus0 addr 800000-9fffff not configured i2c at ebus0 addr 600000-600003 ipl 40 not configured i2c at ebus0 addr 100000-100003 ipl 27 not configured SUNW,lom at ebus0 addr 400000-400063 not configured hme0 at pci1 dev 1 function 1 "Sun HME" rev 0x01: address 08:00:20:c1:b7:d0 ukphy0 at hme0 phy 0: Generic IEEE 802.3u media interface ukphy0: OUI 0x00601d, model 0x000c, rev. 1 hme0: using ivec 3021 for interrupt
siop0 at pci1 dev 2 function 0 "Symbios Logic 53c875" rev 0x03 using on-board RAM ivec 20 scsibus0 at siop0: 16 targets
siop0: target 0 now using tagged 16 bit 20.0 MHz 16 REQ/ACK offset xfers sd0 at scsibus0 targ 0 lun 0: <HP, 9.10GB A 80-SA40, SA40> SCSI2 0/direct fixed sd0: 8678MB, 11474 cyl, 5 head, 309 sec, 512 bytes/sec, 17773524 sec total hme1 at pci1 dev 3 function 1 "Sun HME" rev 0x01: address 08:00:20:c1:b7:d1 ukphy1 at hme1 phy 0: Generic IEEE 802.3u media interface ukphy1: OUI 0x00601d, model 0x000c, rev. hme1: using ivec 301a for interrupt
ppb1 at pci0 dev 1 function 0 "Sun Simba PCI-PCI" rev 0x13 pci2 at ppb1 bus 2
ppb2 at pci2 dev 1 function 0 "DEC 21150 PCI-PCI" rev 0x04 pci3 at ppb2 bus 3
pciide0 at pci3 dev 14 function 0 "CMD Technology PCI0646" rev 0x03: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide0: using ivec 1800 for native-PCI interrupt pciide0: channel 0 disabled (no drives)
atapiscsi0 at pciide0 channel 1 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <TOSHIBA, CD-ROM XM-7002Bc, 1107> SCSI0 5/cdrom removable cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 fxp0 at pci3 dev 15 function 0 "Intel 82557" rev 0x08: ivec 7c8, address 00:d0:b 7:47:63:bb
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4 pcons at mainbus0 not configured
No counter-timer -- using %tick at 440MHz as system clock. root on sd0a
rootdev=0x700 rrootdev=0x1100 rawdev=0x1102 fxp0: device timeout

>How-To-Repeat:

	Install OpenBSD 3.3 or CURRENT on a Sun Netra t1 105 and
	try to use an i82557 fxp card in it. I can provide
	network/console access to a machine for testing. I'd
	like to donate an entire machine, but they're not mine
	and my employer is a skinflint. I could probably donate
	one of these Intel EtherExpress Pro cards however, if it
	would help.

>Fix:

	Use a different network card.

--h4VEHxWn002748.1054390679/foo--

>Release-Note:
Received on Sat May 31 14:31:16 2003