Re: 3.2 & Adaptec 29160N

From: Marco Peereboom <slash(at)peereboom.us>
Date: Tue Nov 12 2002 - 08:23:11 EST

Hint, find the *working* 29U160...

OpenBSD 3.2-current (comp) #15: Sun Nov 3 16:00:50 CST 2002

    root@snortbox.pyrowall.com:/root/comp cpu0: Intel Pentium III (Coppermine) ("GenuineIntel" 686-class) 800 MHz cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,SER,MMX,F XSR,SIMD
real mem = 804827136 (785964K)
avail mem = 740466688 (723112K)
using 4278 buffers containing 40345600 bytes (39400K) of memory mainbus0 (root)
bios0 at mainbus0: AT/286+(a4) BIOS, date 10/23/01, BIOS32 rev. 0 @ 0xfb500 apm0 at bios0: Power Management spec V1.2 apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0xdf14

pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfde80/144 (7 entries)
pcibios0: PCI Exclusive IRQs: 9 10 11
pcibios0: PCI Interrupt Router at 000:07:0 ("VIA VT82C596A PCI-ISA" rev

0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xc800 0xd0000/0x800 0xd1000/0x6600 0xd8000/0x800 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "VIA VT82C691 Host-PCI" rev 0xc4 ppb0 at pci0 dev 1 function 0 "VIA VT82C598 PCI-AGP" rev 0x00 pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "Nvidia GeForce2 MX" rev 0xb2 wsdisplay0 at vga1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) pcib0 at pci0 dev 7 function 0 "VIA VT82C686 PCI-ISA" rev 0x40 pciide0 at pci0 dev 7 function 1 "VIA VT82C571 IDE" rev 0x06: ATA100, channel 0 configured to compatibility, channel 1 configured to compatibility atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <ATAPI, CD-R/RW 24X10, P.MJ> SCSI0 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2 uhci0 at pci0 dev 7 function 2 "VIA VT83C572 USB" rev 0x1a: irq 11 usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x0000 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1 at pci0 dev 7 function 3 "VIA VT83C572 USB" rev 0x1a: irq 11 usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: vendor 0x0000 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered "VIA VT82C686 SMBus" rev 0x40 at pci0 dev 7 function 4 not configured auvia0 at pci0 dev 7 function 5 "VIA VT82C686 AC97 Audio" rev 0x50: irq 11 ac97: codec id 0x49434511 (ICEnsemble ICE1232) ac97: codec features headphone, 18 bit DAC, 18 bit ADC, KS Waves 3D audio0 at auvia0
mpt0 at pci0 dev 9 function 0 "Symbios Logic 53c1020" rev 0x07 mpt0: attached.
mpt1 at pci0 dev 9 function 1 "Symbios Logic 53c1020" rev 0x07 mpt1: attached.
ahc1 at pci0 dev 10 function 0 "Adaptec AHA-29160 U160" rev 0x02: irq 9 ahc1: aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/255 SCBs scsibus1 at ahc1: 16 targets
ahc1: target 0 synchronous at 80.0MHz DT, offset = 0x3f ahc1: target 0 using tagged queuing
sd0 at scsibus1 targ 0 lun 0: <QUANTUM, ATLAS V 36 WLS, 0201> SCSI3 0/direct fixed
sd0: 34732MB, 20907 cyl, 8 head, 425 sec, 512 bytes/sec, 71132998 sec total fxp0 at pci0 dev 11 function 0 "Intel 82557" rev 0x05: irq 11, address 00:90:27:71:9c:e8
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 0 ahc2 at pci0 dev 15 function 0 "Adaptec AHA-2940U2 U2" rev 0x00: irq 11 ahc2: aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/255 SCBs scsibus2 at ahc2: 16 targets
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0 pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec biomask 4e40 netmask 4e40 ttymask 5ec2
pctr: 686-class user-level performance counters enabled mtrr: Pentium Pro MTRR support
dkcsum: sd0 matched BIOS disk 80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02

wsdisplay0: screen 1 deleted
wsdisplay0: screen 1 added (80x50, vt100 emulation)
wsdisplay0: screen 2 deleted
wsdisplay0: screen 2 added (80x50, vt100 emulation)
wsdisplay0: screen 3 deleted
wsdisplay0: screen 3 added (80x50, vt100 emulation)
wsdisplay0: screen 4 deleted
wsdisplay0: screen 4 added (80x50, vt100 emulation)
wsdisplay0: screen 5 deleted
wsdisplay0: screen 5 added (80x50, vt100 emulation)

----- Original Message -----
From: "Fergus Wilde" <fwilde@chethams.org.uk> To: <misc@openbsd.org>
Sent: Tuesday, November 12, 2002 04:51
Subject: 3.2 & Adaptec 29160N

> I apologise in advance for this, as I know it's the kind of question that
of
> work indeed. Naturally I want to put it on my production machine straight
29160N
> U160 SCSI card and 3.2.
Received on Tue Nov 12 08:23:55 2002