11/14's sparc kernel

The new kernel(11/14) panics on boot. the box is a sparc20 currently running the oct5 snapshot with the 10/12 kernel. Any suggestions? Thanks.

jake.

ps. when will we be getting our sparc snapshots again?

Rebooting with command:
Boot device: /iommu/sbus/espdma@f,400000/esp@f,800000/sd@3,0 File and args: bsd
>> OpenBSD BOOT 2.2

Booting bsd @ 0x4000
1899696+259712 [67+88704+73570]
[ using 162796 bytes of bsd ELF symbol table ] console is ttya
Copyright (c) 1982, 1986, 1989, 1991, 1993

        The Regents of the University of California. All rights reserved. Copyright (c) 1995-2002 OpenBSD. All rights reserved. http://www.OpenBSD.org

OpenBSD 3.2-current (MIRAGE) #0: Thu Nov 14 23:59:31 EST 2002

    root@mirage.10k.org:/usr/src/sys/arch/sparc/compile/MIRAGE real mem = 200790016
avail mem = 183488512
using 200 buffers containing 10039296 bytes of memory bootpath:
/iommu@f,e0000000/sbus@f,e0001000/espdma@f,400000/esp@f,800000/sd@3,0 mainbus0 (root): SUNW,SPARCstation-20
cpu0 at mainbus0: RT620/625 @ 150 MHz, on-chip FPU cpu0: 512K byte write-back, 32 bytes/line, sw flush cache enabled obio0 at mainbus0
clock0 at obio0 addr 0xf1200000: mk48t08 (eeprom) timer0 at obio0 addr 0xf1300000 delay constant 73 zs0 at obio0 addr 0xf1100000 pri 12, softpri 6 zstty0 at zs0 channel 0 (console i/o)
zstty1 at zs0 channel 1
zs1 at obio0 addr 0xf1000000 pri 12, softpri 6 zskbd0 at zs1 channel 0: keyboard, type 0 wskbd0 at zskbd0
zstty2 at zs1 channel 1: mouse
SUNW,fdtwo at obio0 addr 0xf1700000 not configured auxreg0 at obio0 addr 0xf1800000
power0 at obio0 addr 0xf1a01000
iommu0 at mainbus0 ioaddr 0xe0000000: version 0x1/0x1, page-size 4096, range 64M
B
sbus0 at iommu0: clock = 25 MHz
dma0 at sbus0 slot 15 offset 0x400000: rev 2 esp0 at dma0 offset 0x800000 pri 4: ESP200, 40MHz, SCSI ID 7 scsibus0 at esp0: 8 targets
sd0 at scsibus0 targ 3 lun 0: <IBM, DNES-309170Y, SAH0> SCSI3 0/direct fixed
sd0: 8748MB, 11474 cyl, 5 head, 312 sec, 512 bytes/sec, 17916240 sec total ledma0 at sbus0 slot 15 offset 0x400010: rev 2 le0 at ledma0 offset 0xc00000 pri 6: address 08:00:20:21:bd:fc le0: 16 receive buffers, 4 transmit buffers SUNW,bpp at sbus0 slot 15 offset 0x4800000 not configured SUNW,DBRIe at sbus0 slot 14 offset 0x10000 not configured hme0 at sbus0 slot 3 offset 0x8c00000 pri 7: address 08:00:20:8f:37:c8 rev 34
qsphy0 at hme0 phy 1: QS6612 10/100 media interface, rev. 1 hme1 at sbus0 slot 3 offset 0x8c10000 pri 7: address 08:00:20:8f:37:c9 rev 34
qsphy1 at hme1 phy 1: QS6612 10/100 media interface, rev. 1 hme2 at sbus0 slot 3 offset 0x8c20000 pri 7: address 08:00:20:8f:37:ca rev 34
qsphy2 at hme2 phy 1: QS6612 10/100 media interface, rev. 1 hme3 at sbus0 slot 3 offset 0x8c30000 pri 7: address 08:00:20:8f:37:cb rev 34
qsphy3 at hme3 phy 1: QS6612 10/100 media interface, rev. 1 root on sd0a
rootdev=0x700 rrootdev=0x1100 rawdev=0x1102 data fault: pc=0xf8007c9c sfva=0xfc000000 sfsr=3a6<FAV> panic: kernel fault
Stopped at Debugger+0x4: jmpl [%o7 + 0x8], %g0 RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS PANIC!
DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION! ddb> trace
mem_access_fault4m(0x9, 0x3a6, 0xfc000000, 0xfbf97b70, 0xfbfae000, 0xfbf97b90) a
t mem_access_fault4m+0x300
kernel_text(0xf8007264, 0xfc000000, 0xfc, 0x4007264, 0x9de3bf18, 0xf81b2800) at
 kernel_text+0x2274
exec_sigcode_map(0xfbf98000, 0xf81c9728, 0xf7fffb78, 0xfbf97f30, 0xf818ff00, 0x
f81c9728) at exec_sigcode_map+0x9c
sys_execve(0xf7fffbb8, 0x0, 0xf81d2000, 0xfbf97f30, 0x0, 0xf81b2800) at sys_exe
cve+0x8bc
start_init(0xfbf98000, 0xfbf97f38, 0xfbf97f29, 0xf81f5400, 0xf81fac00, 0xf81f58
00) at start_init+0x160
proc_trampoline(0x0, 0x0, 0x0, 0x0, 0x0, 0x0) at proc_trampoline+0x10 ddb> ps

   PID   PPID   PGRP    UID  S       FLAGS  WAIT       COMMAND
     7      0      0      0  3    0x100204  crypto_wa  crypto
     6      0      0      0  3    0x100204  aiodoned   aiodoned
     5      0      0      0  3    0x100204  syncer     update
     4      0      0      0  3    0x100204  cleaner    cleaner
     3      0      0      0  3    0x100204  reaper     reaper
     2      0      0      0  3    0x100204  pgdaemon   pagedaemon
*    1      0      0      0  2    0x204004             init
     0     -1      0      0  3     0x80204  scheduler  swapper