(no subject)

I fail in installing 3.2 on a ICP IFD-180 (128 Mb) Flash Disk. When booting on the CD the kernel prints

pciide0:0:0: piomocd error (4) wd0c: aborted command reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0)

several times, however it proceeds but in fdisk and disklabel the same thing happens and I can't write any changes.

I don't know if the following is relevant but I mounted the 3.2 CDs in the fresh 2.7 system and copied the 3.2 release kernel to the system on the flash disk and tried to boot on the 3.2 kernel. The crash info and dmesg from both 2.7 and 3.2 are below.

Ideas why 3.2 doesn't work but 2.7 does and/or how this can be fixed?

Stopped at _Debugger+0x4: leave
ddb> trace
_Debugger(d061bdb4,302,84,d01ca6a4,302) at _Debugger+0x4
_panic(d01ca560,1,2000,d05aaea0,0) at _panic+0x81
_dk_mountroot(0,0,d061bf68,d02edd8e,d05aaea0) at _dk_mountroot+0x13d
_vfs_mountroot(d0619010,619000, 620000,0,0) at _vfs_mountroot+0x12
_main(0,0,0,0,0) at _main+0x3f7

ddb> ps

    PID PPID PGRP UID S FLAGS WAIT COMMAND * 0 -1 0 0 2 0x80204 swapper

syncing disks... OpenBSD 3.2 (GENERIC) #25: Thu Oct 3 19:51:53 MDT 2002

Do you need help?

In addition to our free technical library, Pantek provides professional IT services to companies who utilize Open Source software: Learn more about Pantek's Technical Support offerings Place an order for 24/7/365 Technical Support here Learn more about Pantek, who we are, and what we do Chat with a Live Operator Related openbsd.org Links advocacy announce bugs ipv6 misc ports ports-changes security-announce smp source-changes tech Request more information about Pantek

    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel Pentium 4 ("GenuineIntel" 686-class) 1.62 GHz cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SIMD real mem = 536440832 (523868K)
avail mem = 491864064 (480336K)
using 4278 buffers containing 26923008 bytes (26292K) of memory mainbus0 (root)
bios0 at mainbus0: AT/286+(af) BIOS, date 12/26/01, BIOS32 rev. 0 @ 0xf0ff0
apm0 at bios0: Power Management spec V1.2 apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0x1812 pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xf1760/176 (9 entries) pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB PCI-ISA" rev 0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0xbc00 0xcc000/0x800 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "Intel 82845 Host" rev 0x03 ppb0 at pci0 dev 1 function 0 "Intel 82845 AGP" rev 0x03 pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "Nvidia GeForce2 MX" rev 0xb2 wsdisplay0 at vga1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) ppb1 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x12 pci2 at ppb1 bus 2
eap0 at pci2 dev 10 function 0 "Ensoniq CT5880" rev 0x02pci_intr_map: no mapping for pin A
: couldn't map interrupt
xl0 at pci2 dev 11 function 0 "3Com 3c905C 100Base-TX" rev 0x30: irq 9 address 00:04:75:7e:07:4a
ukphy0 at xl0 phy 24: Generic IEEE 802.3u media interface ukphy0: OUI 0x00601d, model 0x0035, rev. 0 pcib0 at pci0 dev 31 function 0 "Intel 82801BA LPC" rev 0x12 pciide0 at pci0 dev 31 function 1 "Intel 82801BA IDE" rev 0x12: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility wd0 at pciide0 channel 0 drive 0: <IFD-180 V:4.0> wd0: 1-sector PIO, LBA, 123MB, 495 cyl, 16 head, 32 sec, 253440 sectors wd0(pciide0:0:0): using PIO mode 0
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <ASUS, DVD-ROM E616, 2.0> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5 auich0 at pci0 dev 31 function 5 "Intel 82801BA AC97 Audio" rev 0x12: irq 10, ICH2 AC97
ac97: codec id 0x414c4710 (Avance Logic ALC200) ac97: codec features headphone, 18 bit DAC, 18 bit ADC, Realtek 3D audio0 at auich0
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0 pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec biomask c040 netmask c240 ttymask d2c2
pctr: user-level cycle counter enabled
pciide0:0:0: piomode error (4)
wd0c: aborted command reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0), retrying
pciide0:0:0: piomode error (4)
wd0c: aborted command reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0), retrying
pciide0:0:0: piomode error (4)
wd0c: aborted command reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0), retrying
pciide0:0:0: piomode error (4)
wd0c: aborted command reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0), retrying
pciide0:0:0: piomode error (4)
wd0c: aborted command reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0), retrying
pciide0:0:0: piomode error (4)
wd0c: aborted command reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0) pciide0:0:0: piomode error (4)
wd0c: aborted command reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0), retrying
pciide0:0:0: piomode error (4)
wd0c: aborted command reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0), retrying
pciide0:0:0: piomode error (4)
wd0c: aborted command reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0), retrying
pciide0:0:0: piomode error (4)
wd0c: aborted command reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0), retrying
pciide0:0:0: piomode error (4)
wd0c: aborted command reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0), retrying
pciide0:0:0: piomode error (4)
wd0c: aborted command reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0) wd0: dos partition I/O error
pciide0:0:0: piomode error (4)
wd0c: aborted command reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0), retrying
pciide0:0:0: piomode error (4)
wd0c: aborted command reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0), retrying
pciide0:0:0: piomode error (4)
wd0c: aborted command reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0), retrying
pciide0:0:0: piomode error (4)
dkcsum: read of wd0 failed (0)
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
panic: root filesystem has size 0
OpenBSD 2.7 (GENERIC) #25: Sat May 13 18:04:26 MDT 2000

    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel Pentium Pro ("GenuineIntel" 686-class, 0KB L2 cache) 1615 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SIMD real mem = 536440832 (523868K)
avail mem = 492937216 (481384K)
using 5689 buffers containing 26923008 bytes (26292K) of memory mainbus0 (root)
bios0 at mainbus0: AT/286+(af) BIOS, date 12/26/01 apm0 at bios0: Power Management spec V1.2 apm0: AC on, battery charge unknown
pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x1a30 rev 0x03
ppb0 at pci0 dev 1 function 0 vendor "Intel", unknown product 0x1a31 rev 0x03
pci1 at ppb0 bus 1
vendor "Nvidia", unknown product 0x110 (class display, subclass VGA, rev 0xb2) at pci1 dev 0 function 0 not configured ppb1 at pci0 dev 30 function 0 vendor "Intel", unknown product 0x244e rev 0x12
pci2 at ppb1 bus 2
eap0 at pci2 dev 10 function 0 "Ensoniq CT5880" rev 0x02pci_intr_map: no mapping for pin C

eap0: couldn't map interrupt
xl0 at pci2 dev 11 function 0 "3Com 3c905C 100Base-TX" rev 0x30: irq 9 address 00:04:75:7e:07:4a
ukphy0 at xl0 phy 24: Generic IEEE 802.3u media interface ukphy0: OUI 0x00601d, model 0x0035, rev. 0 pcib0 at pci0 dev 31 function 0 vendor "Intel", unknown product 0x2440 rev 0x12
pciide0 at pci0 dev 31 function 1 vendor "Intel", unknown product 0x244b rev 0x12: DMA (unsupported), channel 0 wired to compatibility, channel 1 wired to compatibility
pciide0: channel 0 interrupting at irq 14 wd0 at pciide0 channel 0 drive 0: <IFD-180 V:4.0> wd0: can use 16-bit, PIO mode 4
wd0: 1-sector PIO, LBA, 123MB, 495 cyl, 16 head, 32 sec, 253440 sectors pciide0: channel 1 interrupting at irq 15 atapiscsi0 at pciide0 channel 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <ASUS, DVD-ROM E616, 2.0> SCSI0 5/cdrom removable
cd0: can use 16-bit, PIO mode 4
vendor "Intel", unknown product 0x2445 (class multimedia, subclass audio, rev 0x12) at pci0 dev 31 function 5 not configured isa0 at pcib0
isadma0 at isa0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo vt0 at isa0 port 0x60/16 irq 1: vga 80 col, color, 8 scr, mf2-kbd pms0 at vt0 irq 12
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec biomask c040 netmask c240 ttymask d2c2
pctr: user-level cycle counter enabled
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302 Received on Mon Nov 25 05:55:18 2002