Re: Does anyone on this list have a working instance of OpenBSD with a Xircom RBE-100?

Hi Steve,

I have attached my dmesg to this email.

Thanks for your time.

Ajit

• STeve Andre' <andres@msu.edu> wrote:
  > OK, I just booted my ThinkPad 1480i up. It is a
  > Xircom
  > rbem56g-100 card, so thats both the modem at the
  > 10/100
  > ethernet card.
  >
  > It's dc0 for me. All I did was insert it into my
  > machine and it
  > came up running. Now, your card should in theiory
  > be
  > very close to mine. I suppose there is the chance
  > that
  > the pci device id could be different, and the
  > particular id
  > for your card isn't in the list of devices?
  >
  > I will include a dmesg of my machine. Can you give
  > me one
  > so we can compare the two of them, and perhaps see
  > where
  > the problem lies.
  >
  > --STeve
  >
  > On Saturday 30 November 2002 10:29 pm, you wrote:
  > > Hi Steve,
  > >
  > > I am sorry I could not connect in the past few
  > days.
  > > Can you please let me know how you got your card
  > to
  > > work, if it was indeed a Xircom card. Even if it
  > was
  > > not, can you give me any hints as to how to
  > proceed?
  > >
  > > Thanks,
  Yahoo! Mail Plus - Powerful. Affordable. Sign up now. http://mailplus.yahoo.com OpenBSD 3.2 (GENERIC) #25: Thu Oct 3 19:51:53 MDT 2002 deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel Pentium II ("GenuineIntel" 686-class, 512KB L2 cache) 232 MHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR real mem = 66498560 (64940K) avail mem = 56123392 (54808K) using 837 buffers containing 3428352 bytes (3348K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+(cf) BIOS, date 04/02/98, BIOS32 rev. 0 @ 0xfd820 apm0 at bios0: Power Management spec V1.2 apm0: battery life expectancy 0% apm0: AC on, battery charge critical, estimated 0:00 hours pcibios0 at bios0: rev. 2.1 @ 0xfd880/0x800 pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfb2b0/96 (4 entries) pcibios0: PCI Exclusive IRQs: 11 pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371AB PIIX4 ISA" rev 0x00) pcibios0: PCI bus #2 is the last bus bios0: ROM list: 0xc0000/0xa000 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "Intel 82443BX" rev 0x02 cbb0 at pci0 dev 2 function 0 "Texas Instruments PCI1250 PCI-CardBus" rev 0x02: irq 11 cbb1 at pci0 dev 2 function 1 "Texas Instruments PCI1250 PCI-CardBus" rev 0x02: irq 11 vga1 at pci0 dev 3 function 0 "Neomagic Magicgraph NM2160" rev 0x01 wsdisplay0 at vga1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x01 pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility wd0 at pciide0 channel 0 drive 0: <IBM-DYKA-23240> wd0: 16-sector PIO, LBA, 3102MB, 6304 cyl, 16 head, 63 sec, 6354432 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 atapiscsi0 at pciide0 channel 1 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, CD-ROM XM-1702BC, 1562> SCSI0 5/cdrom removable cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 11 usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: vendor 0x0000 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered "Intel 82371AB Power Mgmt" rev 0x01 at pci0 dev 7 function 3 not configured cardslot0 at cbb0 slot 0 flags 0 cardbus0 at cardslot0: bus 1 device 0 cacheline 0x8, lattimer 0xb0 pcmcia0 at cardslot0 cardslot1 at cbb1 slot 1 flags 0 cardbus1 at cardslot1: bus 2 device 0 cacheline 0x8, lattimer 0xb0 pcmcia1 at cardslot1 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 sb0 at isa0 port 0x220/24 irq 5 drq 1: dsp v3.02 midi0 at sb0: <SB MIDI UART> audio0 at sb0 opl0 at sb0: model OPL3 midi1 at opl0: <SB Yamaha OPL3> pcppi0 at isa0 port 0x61 midi2 at pcppi0: <PC speaker> sysbeep0 at pcppi0 lpt2 at isa0 port 0x3bc/4: polled npx0 at isa0 port 0xf0/16: using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec biomask c840 netmask c840 ttymask d842 pctr: 686-class user-level performance counters enabled mtrr: Pentium Pro MTRR support dkcsum: wd0 matched BIOS disk 80 root on wd0a rootdev=0x0 rrootdev=0x300 rawdev=0x302 dc0 at cardbus1 dev 0 function 0 irq 11 address 00:10:a4:aa:2d:b6 dc0: MII without any PHY!