D-Link DWL-650

I just purchased a DWL-650 for my laptop after seeing it listed under i386 supported wireless cards.
I can't seem to get it working. When I boot up with the card plugged in it doesn't detect the card. (Dmesg below)
(I also get nothing when I plug in/out the card)
No lights come on when the card is plugged in however no lights come on when this card is put in my other laptop (Windows98) Until the driver is loaded.
(This card works fine in the Windows machine)

• wi is enabled in my kernel
• I know this is a cardbus card and my laptop is OLD (486) but my laptop's manual says: PCMCIA SLOTS: Two standard peripheral interface slots.

• Output Voltage - 5 volts,650mA or 3.3 volts, 400mA
• Capacity - 2 Type II cards or 1 Type III card

What could be wrong here? Is it just that this card is not compatible with my laptop?

    Thanks! - Will

(if it matters I disabled apm due to scrolling errors)

OpenBSD 3.2-current (NEC) #1: Sat Dec 14 07:43:16 EST 2002

    root@nec:/usr/src/sys/arch/i386/NEC
cpu0: Intel 486DX2 ("GenuineIntel" 486-class) cpu0: FPU,V86
real mem = 20492288 (20012K)
avail mem = 13479936 (13164K)
using 275 buffers containing 1126400 bytes (1100K) of memory mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 04/19/90 pcibios at bios0 function 0x1a not configured bios0: ROM list: 0xe0000/0x8000
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
vga0 at isa0 port 0x3b0/48 iomem 0xa0000/131072 wsdisplay0 at vga0: console (80x25, vt100 emulation), using wskbd0 wsdisplay0: screen 1-5 added (80x25, vt100 emulation) wdc0 at isa0 port 0x1f0/8 irq 14
wd0 at wdc0 channel 0 drive 0: <TOSHIBA MK2104MAV> wd0: 16-sector PIO, LBA, 2067MB, 4200 cyl, 16 head, 63 sec, 4233600 sectors wd0(wdc0:0:0): using BIOS timings
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16450, no fifo fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
pcic0 at isa0 port 0x3e0/2 iomem 0xd0000/65536 pcic0 controller 0: <Cirrus PD672X> has sockets A and B pcmcia0 at pcic0 controller 0 socket 0
pcmcia1 at pcic0 controller 0 socket 1
pcic0: irq 3, polling enabled
biomask 4040 netmask 4040 ttymask 50ca
pctr: no performance counters in CPU
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
WARNING: NVRAM century is 19 but RTC year is 2002 wsdisplay0: screen 1 deleted
wsdisplay0: screen 1 added (80x50, vt100 emulation) Received on Tue Dec 31 13:34:08 2002