|
|||||||||||
|
3.2 SCSI crash
From: Cameron Schaus <cam(at)schaus.ca>
Date: Sun Jan 19 2003 - 18:16:50 EST
I copied the following from the console:
sd1(ahc:1:0): SCB 0x10 - timed out
sd1(ahc:1:0): Queuing a BDR SCB sd1(ahc:1:0): Bus Device Reset Message Sent sd1(ahc:1:0): no longer in timeout, status = 0 sd1(ahc:1:0): target 1 using async transfers sd1(ahc:1:0): Bus Device Reset on A:1 3 SCBs aborted Both drives are sitting on the internal connector, and nothing is connected to the external connector. Is this a problem with my driver, cabling, controller card, or a software problem?
Any insight is appreciated.
OpenBSD 3.2-stable (GENERIC) #1: Sun Nov 17 09:31:53 MST 2002
root@scrap.local:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium Pro ("GenuineIntel" 686-class, 256KB L2 cache) 199 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV
real mem = 133804032 (130668K)
pcibios0: PCI BIOS has 6 Interrupt Routing table entries
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371SB PCI-ISA" rev 0x00)
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4800 0xe8000/0x2000! 0xea000/0x2000 pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02 pcib0 at pci0 dev 7 function 0 "Intel 82371SB PCI-ISA" rev 0x01 pciide0 at pci0 dev 7 function 1 "Intel 82371SB IDE" rev 0x00: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility vga1 at pci0 dev 15 function 0 "Matrox MGA Millennium II 2164W" rev 0x00 wsdisplay0 at vga1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) ahc1 at pci0 dev 17 function 0 "Adaptec AHA-2940U" rev 0x00: irq 10 ahc1: aic7880: Ultra Wide Channel A, SCSI Id=7, 16/255 SCBs scsibus0 at ahc1: 16 targets ahc1: target 0 synchronous at 10.0MHz, offset = 0xf ahc1: target 0 using tagged queuing sd0 at scsibus0 targ 0 lun 0: <SEAGATE, ST19171N, 0017> SCSI2 0/direct fixed sd0: 8683MB, 5268 cyl, 20 head, 168 sec, 512 bytes/sec, 17783112 sec total ahc1: target 1 synchronous at 10.0MHz, offset = 0xf ahc1: target 1 using tagged queuing sd1 at scsibus0 targ 1 lun 0: <SEAGATE, ST19171N, 0019> SCSI2 0/direct fixed sd1: 8683MB, 5268 cyl, 20 head, 168 sec, 512 bytes/sec, 17783112 sec total fxp0 at pci0 dev 19 function 0 "Intel 82557" rev 0x01: irq 10, address 00:a0:c9:33:36:75 nsphy0 at fxp0 phy 1: DP83840 10/100 media interface, rev. 1 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> sysbeep0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 npx0 at isa0 port 0xf0/16: using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec isapnp0 at isa0 port 0x279: read port 0x203 wss1 at isapnp0 "CS4236, CSC0000, , WSS/SB" port 0x534/4,0x388/4,0x220/16 irq 5 drq 1,0: CS4236/CS4236B (vers 0) audio0 at wss1 joy0 at isapnp0 "CS4236, CSC0001, , Game" port 0x200/8 "CS4236, CSC0010, , Ctrl" at isapnp0 port 0xf00/8 not configured mpu0 at isapnp0 "CS4236, CSC0003, , MPU" port 0x330/2 irq 9 mpu0: find failed biomask 440 netmask 440 ttymask 14c2 pctr: 686-class user-level performance counters enabled mtrr: Pentium Pro MTRR support dkcsum: sd0 matched BIOS disk 80 dkcsum: sd1 matched BIOS disk 81 root on sd0a rootdev=0x400 rrootdev=0xd00 rawdev=0xd02 Received on Sun Jan 19 19:39:13 2003 This archive was generated by hypermail 2.1.8 : Wed Aug 23 2006 - 13:32:29 EDT |
||||||||||
|
|||||||||||