Re: Problems with SCSI disks

From: Kremlyn Vostok <kremlyn(at)mbox.com.au>
Date: Fri Feb 28 2003 - 18:23:05 EST

I've installed OpenBSD 3.1 on a Netfinity before, also with IBM SCSI disks and the same Adaptec SCSI card - no problems.

When the machine boots, hit Ctrl+A to enter the SCSI cards' BIOS and make sure the drives are both detected, have a separate LUN, report geometries, etc. Also, it might not hurt to give them a low level format from within the BIOS if the option is available (should be!).

Your boot device will typically be the drive with the lowest LUN.

Good luck!

//kremlyn

---

Would you like to receive faxes to your personal email address? You can with mBox. Visit http://www.mbox.com.au/fax Received on Fri Feb 28 18:29:52 2003