Re: Cannot boot after install: disk on third ide controller - fasttrack "raid"

From: openbsd <obsd(at)insecteam.de>
Date: Fri Mar 14 2003 - 08:27:37 EST

Alexander Yurchenko wrote:
> On Fri, Mar 14, 2003 at 12:41:28PM +0100, openbsd wrote:

>>Ok, I suppose something like a) must be possible, just dont
>>know how to tell the kernel how to find it's root file sys-
>>tem.
>>And b) obviously won't work, because there is no driver on
>>obsd for my "raid".
>>
>>Any ideas? Thank you for your help.

>
>
> First of all please show your dmesg of floppy or cdrom boot.

First of all, thank you for answering.
This is dmesg after boot from install floppy (fasttrack mirroring enabled): OpenBSD 3.2 (RAMDISK) #97: Thu Oct 3 20:06:10 MDT 2002

     deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK cpu0: Intel Pentium III (Tualatin) ("GenuineIntel" 686-class) 1.40 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SIMD real mem = 267948032 (261668K)
avail mem = 244621312 (238888K)
using 3296 buffers containing 13500416 bytes (13184K) of memory mainbus0 (root)
bios0 at mainbus0: AT/286+(ff) BIOS, date 12/18/01, BIOS32 rev. 0 @ 0xf0230 pcibios0 at bios0: rev. 2.1 @ 0xf0200/0xb00

pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xf9570/160 (8 entries)
pcibios0: PCI Interrupt Router at 000:07:0 ("VIA VT82C686 PCI-ISA" rev 0x00)
pcibios0: PCI bus #2 is the last bus

bios0: ROM list: 0xc0000/0x8000 0xc8000/0x8800 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "VIA VT82C691 Host-PCI" rev 0xc4 ppb0 at pci0 dev 1 function 0 "VIA VT82C598 PCI-AGP" rev 0x00 pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Mach64 GM" rev 0x27 wsdisplay0 at vga1: console (80x25, vt100 emulation) pcib0 at pci0 dev 7 function 0 "VIA VT82C686 PCI-ISA" rev 0x40 pciide0 at pci0 dev 7 function 1 "VIA VT82C571 IDE" rev 0x06: ATA100, channel 0 configured to compatibility, channel 1 configured to compatibility pciide0: channel 0 ignored (disabled)
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MITSUMI, CD-ROM SR244W, T01A> SCSI0 5/cdrom removable cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 "VIA VT83C572 USB" rev 0x1a at pci0 dev 7 function 2 not configured pchb1 at pci0 dev 7 function 4 "VIA VT82C686 SMBus" rev 0x40 ppb1 at pci0 dev 8 function 0 "Intel S21152BB PCI-PCI" rev 0x00 pci2 at ppb1 bus 2

"D-Link Systems 550TX" rev 0x12 at pci2 dev 4 function 0 not configured
"D-Link Systems 550TX" rev 0x12 at pci2 dev 5 function 0 not configured
"D-Link Systems 550TX" rev 0x12 at pci2 dev 6 function 0 not configured
"D-Link Systems 550TX" rev 0x12 at pci2 dev 7 function 0 not configured

pciide1 at pci0 dev 15 function 0 "Promise PDC20265" rev 0x02: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide1: using irq 3 for native-PCI interrupt wd0 at pciide1 channel 0 drive 0: <Maxtor 2F040L0> wd0: 16-sector PIO, LBA, 39205MB, 16383 cyl, 16 head, 63 sec, 80293248 sectors wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5 wd1 at pciide1 channel 1 drive 0: <Maxtor 2F040L0> wd1: 16-sector PIO, LBA, 39205MB, 16383 cyl, 16 head, 63 sec, 80293248 sectors wd1(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5 fxp0 at pci0 dev 16 function 0 "Intel 82557" rev 0x0d: irq 5, address 00:00:e2:9a:39:58 inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4 fxp1 at pci0 dev 17 function 0 "Intel 82557" rev 0x0d: irq 5, address 00:00:e2:9a:39:59 inphy1 at fxp1 phy 1: i82555 10/100 media interface, rev. 4 isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0 npx0 at isa0 port 0xf0/16: using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec biomask 8048 netmask 8068 ttymask 806a
rd0: fixed, 3560 blocks
wd1: no disk label
dkcsum: warning: dup BSD->BIOS disk mapping root on rd0a
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02

When I disable the fasttrack mirroring feature and enable "boot from pci scsi" in bios, I get the following differences (left is mirroring, right is without):

real mem  = 267948032 (261668K)                  | real mem  = 267956224 (261676K)
avail mem = 244621312 (238888K)                  | avail mem = 244625408 (238892K)
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x8800   | bios0: ROM list: 0xc0000/0x8000
dkcsum: warning: dup BSD->BIOS disk mapping      <

Andreas

-- 
InSecTeam GmbH  -  www.InSecTeam.de
TZ Friedrich-Ebert-Stra?e, D-51429 Bergisch Gladbach
Ihr Partner fu"r Internet-Sicherheit
Andreas Ka"ser, Tel: +49-02204-84-2970, Fax: +49-2204-84-2971

Received on Fri Mar 14 08:29:30 2003