bus-master DMA error: missing interrupt, status=0x21

From: A. Farber <Alexander.Farber(at)t-online.de>
Date: Tue Mar 18 2003 - 17:28:19 EST

Hi,

I've installed the -current from yesterday on an older PC (the dmesg is on the bottom of this mail) and when I wanted to install the first package I've got this error below. Any suggestions? Thank you

The archives suggest bad hardware, but this PC had been running Windows 98 just fine. Maybe I should switch DMA off somehow (the "man pciide" doesn't tell how to do it)?

Regards
Alex

chajka# pkg_add /mnt/packages/screen-3.9.13.tgz

Mar 17 08:33:29 chajka /bsd: wd0(pciide0:0:0): timeout
Mar 17 08:33:29 chajka /bsd: wd0(pciide0:0:0): timeout
Mar 17 08:33:30 chajka /bsd:    type: ata
Mar 17 08:33:30 chajka /bsd:    type: ata
Mar 17 08:33:30 chajka /bsd:    c_bcount: 65536
Mar 17 08:33:30 chajka /bsd:    c_bcount: 65536
Mar 17 08:33:30 chajka /bsd:    c_skip: 0
Mar 17 08:33:30 chajka /bsd:    c_skip: 0
Mar 17 08:33:30 chajka /bsd: pciide0:0:0: bus-master DMA error: missing

interrupt, status=0x21
Mar 17 08:33:30 chajka /bsd: pciide0:0:0: bus-master DMA error: missing interrupt, status=0x21
Mar 17 08:33:30 chajka /bsd: wd0a: device timeout writing fsbn 1906640 of 1906640-1906767 (wd0 bn 2168720; cn 2151 tn 8 sn 8), retrying Mar 17 08:33:30 chajka /bsd: wd0a: device timeout writing fsbn 1906640 of 1906640-1906767 (wd0 bn 2168720; cn 2151 tn 8 sn 8), retrying Mar 17 08:33:30 chajka /bsd: wd0: soft error (corrected) Mar 17 08:33:30 chajka /bsd: wd0: soft error (corrected)

+---------------
| The screen-3.9.13 configuration file, /etc/screenrc,
| has been installed. Please view this file and change
| the configuration to meet your needs.
+---------------

Here is the dmesg:

OpenBSD 3.3 (GENERIC) #37: Mon Mar 17 00:28:05 MST 2003

    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC

cpu0: F00F bug workaround installed
cpu0: Intel Pentium (P54C) ("GenuineIntel" 586-class) 134 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8

real mem = 33140736 (32364K)
avail mem = 25169920 (24580K)
using 430 buffers containing 1761280 bytes (1720K) of memory mainbus0 (root)
bios0 at mainbus0: AT/286+(89) BIOS, date 07/20/98, BIOS32 rev. 0 @ 0xfb140 apm0 at bios0: Power Management spec V1.2 apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0xb608

pcibios0: PCI BIOS has 6 Interrupt Routing table entries
pcibios0: PCI Exclusive IRQs: 11
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371AB PIIX4 ISA" rev

0x00)
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0x8000
pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "Intel 82439TX System" rev 0x01 pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x01 pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility wd0 at pciide0 channel 0 drive 0: <QUANTUM FIREBALL1280A> wd0: 8-sector PIO, LBA, 1222MB, 2484 cyl, 16 head, 63 sec, 2503872 sectors wd0(pciide0:0:0): using PIO mode 4, DMA mode 2 atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, CD-ROM XM-6002B, 0527> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 0, DMA mode 1 uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 11 usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x0000 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered "Intel 82371AB Power Mgmt" rev 0x01 at pci0 dev 7 function 3 not configured isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
vga0 at isa0 port 0x3b0/48 iomem 0xa0000/131072 wsdisplay0 at vga0: console (80x25, vt100 emulation), using wskbd0 wsdisplay0: screen 1-5 added (80x25, vt100 emulation) ne1 at isa0 port 0x300/32 irq 10
ne1: NE2000 (RTL8019) Ethernet
ne1: address 00:00:e8:53:95:ed
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec isapnp0 at isa0 port 0x279: read port 0x203 ne3 at isapnp0 "NE2000 PLUG & PLAY ETHERNET CAR, @@@9519, PNP80D6, " port 0x200/32 irq 5
ne3: NE2000 (RTL8019) Ethernet
ne3: address 00:00:e8:53:95:ed
biomask c840 netmask cc60 ttymask cce2
pctr: 586-class performance counters and user-level cycle counter enabled dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
wd0(pciide0:0:0): timeout

        type: ata
        c_bcount: 65536
        c_skip: 0

pciide0:0:0: bus-master DMA error: missing interrupt, status=0x21 wd0a: device timeout writing fsbn 1906640 of 1906640-1906767 (wd0 bn 2168720; cn 2151 tn 8 sn 8), retrying
wd0: soft error (corrected) Received on Tue Mar 18 17:30:01 2003