Re: -current testing with VMware

From: Marco Peereboom <slash(at)peereboom.us>
Date: Mon Apr 07 2003 - 21:44:21 EDT

I have not got X to work yet but I have not tried real hard.

Dmesg:
OpenBSD 3.3 (GENERIC) #44: Sat Mar 29 13:22:05 MST 2003

    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel Pentium III (Tualatin) ("GenuineIntel" 686-class) 797 MHz cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,F XSR,SIMD
real mem = 268021760 (261740K)
avail mem = 242696192 (237008K)
using 3297 buffers containing 13504512 bytes (13188K) of memory mainbus0 (root)
bios0 at mainbus0: AT/286+(5d) BIOS, date 02/15/02, BIOS32 rev. 0 @ 0xfd860
apm0 at bios0: Power Management spec V1.2 apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 @ 0xfd860/0x7a0 pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfdf30/176 (9 entries) pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371FB PCI-ISA" rev 0x00)
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0x6000! 0xdc000/0x4000! pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "Intel 82443BX" rev 0x01 pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x08 pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <VMware Virtual IDE Hard Drive> wd0: 64-sector PIO, LBA, 1023MB, 2080 cyl, 16 head, 63 sec, 2096640 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <NECVMWar, VMware IDE CDR10, 1.00> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x00: irq 9 usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x0000 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered "Intel 82371AB Power Mgmt" rev 0x08 at pci0 dev 7 function 3 not configured
vga1 at pci0 dev 15 function 0 vendor "VMware", unknown product 0x405 rev 0x00
wsdisplay0 at vga1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) le1 at pci0 dev 16 function 0 "AMD 79c970 PCnet-PCI LANCE" rev 0x10

le1: address 00:50:56:40:28:d6
le1: 8 receive buffers, 2 transmit buffers
le1: interrupting at irq 9

isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0 pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16

pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pccom2 at isa0 port 0x3e8/8 irq 5: ns16550a, 16 byte fifo

fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec biomask c240 netmask c240 ttymask d242
pctr: 686-class user-level performance counters enabled mtrr: CPU supports MTRRs but not enabled dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302

> -----Original Message-----
Received on Mon Apr 7 21:49:23 2003