HP SmartRaid 5i (64 MB, v2.36) on a HP ProLiant DL380

From: Stefan Sonnenberg-Carstens <s.sonnenberg(at)coolspot.de>
Date: Tue Sep 16 2003 - 06:04:21 EDT

Hi list,
while trying to install the OpenBSD 3.4 SNAP from the 15th september on this mashine, I had to realize, that the RAID ctrl was not usable. Any change of getting it going for install ?

Here is the dmesg :

OpenBSD 3.4 (RAMDISK_CD) #124: Mon Sep 15 22:44:18 MDT 2003

    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK_CD cpu0: Intel Pentium 4 ("GenuineIntel" 686-class) 2.79 GHz cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SIMD,SIMD2,SS,HTT,TM,SBF,CNXT-ID real mem = 2147045376 (2096724K)
avail mem = 1988194304 (1941596K)
using 4278 buffers containing 107454464 bytes (104936K) of memory mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf0000 pcibios0 at bios0: rev. 2.1 @ 0xf0000/0x2000

pcibios0: PCI BIOS has 9 Interrupt Routing table entries
pcibios0: no compatible PCI ICU found
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #0 is the last bus

bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4000 0xcc000/0x1800 0xee000/0x2000! pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "ServerWorks CMIC_LE Host" rev 0x13 pchb1 at pci0 dev 0 function 1 "ServerWorks CMIC_LE Host" rev 0x00 pci1 at pchb1 bus 3
pchb2 at pci0 dev 0 function 2 vendor "ServerWorks", unknown product 0x0 rev 0x00
pci2 at pchb2 bus 1
"Compaq Smart Array 5i/532 rev.2" rev 0x01 at pci2 dev 3 function 0 not
configured
vga1 at pci0 dev 3 function 0 "ATI Rage XL" rev 0x27 wsdisplay0 at vga1: console (80x25, vt100 emulation) vendor "Compaq", unknown product 0xb203 (class system subclass miscellaneous, rev 0x01) at pci0 dev 4 function 0 not configured vendor "Compaq", unknown product 0xb204 (class system subclass miscellaneous, rev 0x01) at pci0 dev 4 function 2 not configured pcib0 at pci0 dev 15 function 0 "ServerWorks CSB5 SouthBridge" rev 0x93 pciide0 at pci0 dev 15 function 1 "ServerWorks CSB5 IDE" rev 0x93: DMA atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <COMPAQ, CD-ROM SN-124, N104> SCSI0 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4
ohci0 at pci0 dev 15 function 2 "ServerWorks OSB4/CSB5 USB" rev 0x05: irq 7, OHCI version 1.0, legacy support
ohci0: SMM does not respond, resetting
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: ServerWorks OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 4 ports with 4 removable, self powered

pchb3 at pci0 dev 15 function 3 "ServerWorks CSB5 PCI Bridge" rev 0x00
pchb4 at pci0 dev 16 function 0 "ServerWorks CIOBX2" rev 0x05
pchb5 at pci0 dev 16 function 2 "ServerWorks CIOBX2" rev 0x05

pci3 at pchb5 bus 6
"Compaq PCI Hotplug controller" rev 0x14 at pci3 dev 30 function 0 not
configured
pchb6 at pci0 dev 17 function 0 "ServerWorks CIOBX2" rev 0x05 pchb7 at pci0 dev 17 function 2 "ServerWorks CIOBX2" rev 0x05 pci4 at pchb7 bus 2
bge0 at pci4 dev 1 function 0 "Broadcom BCM5703X" rev 0x02: irq 11: address: 00:0b:cd:dc:57:6b
bge1 at pci4 dev 2 function 0 "Broadcom BCM5703X" rev 0x02: couldn't establish interrupt at irq 15
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0 npx0 at isa0 port 0xf0/16: using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec biomask c0c0 netmask c8c0 ttymask c8c2
rd0: fixed, 3560 blocks
root on rd0a
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02

Cheers,
Stefan Received on Tue Sep 16 06:09:16 2003